User guide

40 Copyright © Acronis International GmbH, 2002-2012.
Management Console 386 MB 193 MB CD-R/RW, DVD-
R/RW, or BD-
R/RE
for creating
bootable media
1024x768 screen
resolution
Mouse (required)
OS Deploy Server 54 MB 27 MB
Management Agent 38 MB 19 MB
PXE Server 30 MB 15 MB
Wake-on-LAN Proxy 12 MB 6 MB
License Server 24 MB 12 MB
Minimum memory requirements for a component are the same as for the Windows operating
system where it is installed.
Network interface card is a common requirement for all the components.
Bootable media
Media type Memory ISO image size
Based on Windows PE 512 MB 357 MB
Linux-based 256 MB 110 MB
4.3 Used ports and IP addresses
The Acronis Snap Deploy 4 OS Deploy Server and Acronis Snap Deploy 4 Management Console
components use the following ports and IP addresses for remote operation:
 UDP port: 9876
 TCP port: 9876. If this port is busy, the deployment server and the management console choose a
port at random
 IPv4 multicast address: 239.255.219.45
 Acronis Snap Deploy 4 Management Console UDP port: 9877. If this port is busy, the
management console chooses a port at random
Acronis PXE Server uses the following ports and IP addresses:
 UDP port: 67, 68, 69
 Broadcast address: 255.255.255.255
For a remote installation (p. 47), the TCP port 25001 is used.
If you are using a firewall, you may need to set the appropriate access options.
4.4 Typical installation
With typical installation, all components of Acronis Snap Deploy 4 that are needed for deployment
and offline imaging will be installed on the same machine.