Specifications

12.2 SNMP

You can choose whether to send event log messages issued by Acronis Recovery for MS SQL

Server to computers running SNMP (Simple Network Management Protocol) management

applications.

To specify SNMP settings, check the Send Notification with SNMP parameter to enable SNMP

notification.

In the Community Name field, enter the name of the SNMP community to which both the

Host (the computer running the SNMP management application) and the computer running

the task belong.

In the Host Name field, enter a name of the computer running the SNMP management

application, to which notifications will be sent. If not specified, messages will be sent to all

SNMP clients found in the local network.

Below in this window you can choose whether you want to get notifications:

• upon the operation's successful completion parameter;

• upon the operation failure parameter.

Figure 71. Setting SNMP notifications

You can check if the settings are correct by clicking the Send test SNMP message button.

12.3 Windows event log

You can save event messages to the Windows Event Log (to see this log, run eventvwr.exe

or select Control Panel -> Administrative tools -> Event Viewer).

To save event messages to Windows Event Log select the Save messages option and

choose one of the following from the drop-down list:

• All events - all events (information, warnings and error messages) will be

recorded to the Windows Event Log

• Warnings and errors - warnings and error messages will be recorded to the

Windows Event Log