Specifications

107
13.4 Restore Commands
13.4.1 RestoreIS
Use RestoreIS command to restore whole information stores and storage groups. In
case you specify mailboxes in the
item option, the operation will fail.
See options’ description in 13.4.3 section.
Cmd.exe restoreIS /location:<URI> [/credentials:"<login>:<password>"]
/archive:<name> [/password:<password>] [ /item:"<item>"
[/storagegroup:<storagegroupname>][/activerestore] [/dialtone
[/overwriteDialtoneDB]]] [/pit:<time>] [/priority:Low|Normal|High] [/validate]
[/overwriteExistingEmails] [skipExistingDatabases]
13.4.2 RestoreMB
Use RestoreMB command to restore separate mailboxes. In case you specify
information stores or storage groups in the
item option, the operation will fail.
See options’ description in 13.4.3 section.
13.4.3 Description of Options
/location:<URI>
Specifies an archive location’s URI. The path may be specified in one of the
following ways: “C:\path\to\dir\”, “\\computer\share\dir\”,
“ftp://host/mybackups/” or “bsp://host/BackupServer”.
/credentials:<login>:<password>
Task execution account’s credentials
/archive:<name>
Specifies an ID of an archive within the specified location
/password:<password>
Specifies a password if an archive was created with password protection
/item:<item>
This is an optional parameter. It specifies a parent item in the following format:
“
//StorageGroup_name/Database_name/Mailbox_name/Folder_name ”
To restore all storage groups set “//” as the parameter’s value. If this
parameter is not specified, the whole information store will restored
/activerestore
Specify this parameter to use Active Restore mode (for restoring storage
groups only)
/dialtone
Specify this parameter to use dial tone mode (for restoring storage
groups only)
/overwriteDialtoneDB
Specify this parameter to enable overwriting dial tone databases
(acceptable while restoring storage groups only)