Operation Manual

Then you must specify which disk the data is transferred from.
Select source hard disk
Markings on this page help you to understand which disk should be the
source and which the destination one (check for disk numbers, volume
labels, partitions and file systems on disks).
In the lower part of the window you see the graphical representation (as
rectangles of various sizes) of the partitions of the selected hard disk, and
also the unallocated space. Along with the number of the disk you see some
additional information: partition number, volume label (e.g. SYSTEM), file
system type (e.g. FAT16 or FAT32), size of partition in gigabytes (GB).
Partition types (Primary and Logical) and unallocated space are shown in
different colors. All this information prevents you from being confused as to
where from and where to you are transferring your data.
Select the disk to which the data will be transferred on the Destination disk
page.
On this page you cannot select the disk that you have designated as the
source disk on the previous page, so it is grayed.
Acronis PowerUtilities
31