User Guide

Next you can edit the name of the folder to which the operating system will

be installed (WINNT by default); it is also useful to permit installation

partition selection there:

Next the wizard creates an installation configuration and prompts you to

reboot the computer to start the installation.

1. Run the setup program (WINNT.EXE) from DOS operating system. It is

recommended that you load some disk caching driver, for example

SMARTDRV.EXE with 32768 parameter (buffer size), prior to installation.

The setup program copies all the operating system files to a temporary

folder and also creates an installation configuration and reboots the

computer.

For Windows NT operatin

systems the DOS mode setup pro

ram should be run

with /B key, otherwise instead of creatin

an installation confi

uration it will

offer to create 3 installation diskettes.

2. Boot from the bootable CD-ROM. This way of installation differs from the

previous ones because it does not create a special installation

configuration and starts the 1

stage of installation instead.

If you want to install the operatin

system in a certain boot context, you have to

create a new boot from floppy section, create the boot context for it, boot this

section from the Boot Menu, and reboot the computer to boot from CD-ROM

before getting to the Boot Menu.