User`s guide

To configure the Acronis Internet Security Suite 2010 firewall to allow file and printer
sharing with the entire Wi-Fi network, follow these steps:
1. Open Acronis Internet Security Suite 2010 and switch the user interface to Expert
Mode.
2. Click Firewall on the left-side menu.
3. Click the Network tab.
4. In the Network Configuration table, Trust Level column, click the arrow in the
cell corresponding to the Wi-Fi network.
5. Depending on the level of security you want to obtain, choose one of the following
options:
Unsafe - to access the files and printers shared in the Wi-Fi network, without
allowing access to your shares.
Safe - to allow file and printer sharing both ways. This means that the users
connected to the Wi-Fi network can also access your shared files or printer.
If you still cannot share files or a printer with specific computers in the Wi-Fi network,
most likely this is not caused by the Acronis Internet Security Suite 2010 firewall
on your computer. Check for other potential causes, such as the following:
The firewall on the other computer may block file and printer sharing in unsecured
(public) Wi-Fi networks.
If the Acronis Internet Security Suite 2010 firewall is used, the same procedure
must be followed on the other computer to allow file and printer sharing with
your computer.
If the Windows Firewall is used, it can be configured to allow file and printer
sharing as follows: open the Windows Firewall settings window, Exceptions
tab and select the File and Printer Sharing check box.
If another firewall program is used, please refer to its documentation or help
file.
General conditions that may prevent using or connecting to the shared printer:
You may need to log on to a Windows administrator account to access the
shared printer.
Permissions are set for the shared printer to allow access to specific computer
and users only. If you are sharing your printer, check the permissions set for
the printer to see if the user on the other computer is allowed access to the
printer. If you are trying to connect to a shared printer, check with the user on
the other computer if you have permission to connect to the printer.
The printer connected to your computer or to the other computer is not shared.
The shared printer is not added on the computer.
Troubleshooting
292