Replication Manual

17
For example: https://onlinebackup.yourdomain.com
The setup will verify this address and warn you if it is unable to connect to your BackupAgent
server.
Configuring the Replication Server
 Select the path where the replicated data should be stored. There should be enough space
to contain all the data selected for replication.
 Enter a custom login name and password which shall be used by the Replication Client to
connect.
 Enter the TCP port number to which the Replication Server should listen. Any firewall or
routing devices should be configured to allow communication over this port from client to
server.
Note: This configuration, including username and password, is stored in the database. There is
no need to remember them later as the Replication Client shall read this from the database. Also,
this cannot be changed later on, other than by removing the Replication Server and installing it
again.