Operation Manual

VMware ESXi

virtual machine

Hyper-V virtual

machine

Virtuozzo virtual

machine

Virtuozzo

container

For instructions on how to perform migration, refer to the following sections:

 Physical-to-virtual (P2V) - "Physical machine to virtual" (p. 38)

 Virtual-to-virtual (V2V) - "Virtual machine" (p. 39)

 Virtual-to-physical (V2P) - "Virtual machine" (p. 39) or "Recovering disks by using bootable

media" (p. 41)

Although it is possible to perform V2P migration in the web interface, we recommend using bootable

media in specific cases. Sometimes, you may want to use the media for migration to ESXi or Hyper-V.

The media enables you to do the following:

 Choose individual disks or volumes for recovery.

 Manually map the disks from the backup to the target machine disks.

 Recreate logical volumes (LVM) or Linux Software RAID on the target machine.

 Provide drivers for specific hardware that is critical for the system bootability.

2.13 Troubleshooting

This section describes how to save an agent log to a .zip file. If a backup fails for an unclear reason,

this file will help the technical support personnel to identify the problem.

To collect logs

1. Select the machine that you want to collect the logs from.

2. Click Activities.

3. Click Collect system information.

4. If prompted by your web browser, specify where to save the file.