Operation Manual

 Select a recovery point on the Backups tab (p. 48).

2. Click Recover > Entire machine.

3. If you want to recover to a physical machine, select Physical machine in Recover to. Otherwise,

skip this step.

Recovery to a physical machine is possible only if the disk configuration of the target machine

exactly matches the disk configuration in the backup.

If this is the case, continue to step 4 in "Physical machine" (p. 37). Otherwise, we recommend

that you perform the V2P migration by using bootable media (p. 41).

4. The software automatically selects the original machine as the target machine.

To recover to another virtual machine, click Target machine, and then do the following:

a. Select the hypervisor (VMware ESXi, Hyper-V, or Virtuozzo).

Only Virtuozzo virtual machines can be recovered to Virtuozzo. For more information about

V2V migration, refer to "Machine migration" (p. 54).

b. Select whether to recover to a new or existing machine.

c. Select the host and specify the new machine name, or select an existing target machine.

d. Click OK.

5. [Optional] When recovering to a new machine, you can also do the following:

 Click Datastore for ESXi or Path for Hyper-V and Virtuozzo, and then select the datastore

(storage) for the virtual machine.

 Сlick VM settings to change the memory size, the number of processors, and the network

connections of the virtual machine.

6. Click Start recovery.

7. When recovering to an existing virtual machine, confirm that you want to overwrite the disks.

The recovery progress is shown on the Activities tab.