User guide

5.7.1 Additional settings

Specify the additional settings for the recovery operation by selecting or clearing the following check

boxes.

Validate backup archive before recovery

The preset is Disabled.

This option defines whether to validate a backup to ensure that the backup is not corrupted, before

data is recovered from it.

Use FTP in Active mode

The preset is: Disabled.

Enable this option if the FTP server supports active mode and you want this mode to be used for file

transfers.

Restart machine automatically if it is required for recovery

This option is effective when recovery takes place on a machine running an operating system.

The preset is Disabled.

The option defines whether to reboot the machine automatically if it is required for recovery. Such

might be the case when a volume locked by the operating system has to be recovered.

Restart machine automatically after recovery is finished

This option is effective when operating under bootable media.

The preset is Disabled.

This option enables booting the machine into the recovered operating system without user

interaction.

Check file system after recovery

This option is effective only when recovering disks or volumes.

When operating under bootable media, this option is not effective for the NTFS file system.

The preset is Disabled.

This option defines whether to check the integrity of the file system after a disk or volume recovery.

Set current date and time for recovered files

This option is effective only when recovering files.

The preset is Enabled.

This option defines whether to recover the files’ date and time from the archive or assign the files

the current date and time.