User`s guide

For detailed information about using SNMP with Acronis Backup & Recovery 10, please see "Support

for SNMP (p. 38)".

The preset is: Use the setting set in the Machine options.

To select whether to send the backup operations events to the SNMP managers:

Choose one of the following:

 Use the setting set in the Machine options – to use the setting specified for the machine. For

more information refer to Machine options (p. 47).

 Send SNMP notifications individually for backup operation events – to send the events of the

backup operations to the specified SNMP managers.

 Types of events to send – choose the types of events to be sent: All events, Errors and

warnings, or Errors only.

 Server name/IP – type the name or IP address of the host running the SNMP management

application, the messages will be sent to.

 Community – type the name of the SNMP community to which both the host running the

SNMP management application and the sending machine belong. The typical community is

"public".

Click Send test message to check if the settings are correct.

 Do not send SNMP notifications – to disable sending the log events of the backup operations to

SNMP managers.

3.3.1.12 Fast incremental/differential backup

The option is effective in Windows and Linux operating systems and bootable media.

This option is effective for incremental and differential disk-level backup.

This option defines whether a file change is detected using the file size and time stamp or by

comparing the file contents to those stored in the archive.

The preset is: Enabled.

Incremental or differential backup captures only data changes. To speed up the backup process, the

program determines whether a file has changed or not by the file size and the date/time when the

file was last modified. Disabling this feature will make the program compare the entire file contents

to those stored in the archive.

3.3.1.13 Backup splitting

This option is effective for Windows and Linux operating systems and bootable media.

The option defines how a backup can be split.

The preset is: Automatic.

The following settings are available.

Automatic

With this setting, Acronis Backup & Recovery 10 will act as follows.

 When backing up to a hard disk: