User`s guide

54 Copyright © Acronis, Inc., 2000-2010
 User name – enter the user name.
 Password – enter the password.
6. Click Send test e-mail message to check if the settings are correct.
Messenger service (WinPopup)
This option is effective for Windows and Linux operating systems on the sending machine and only
for Windows on the receiving machine.
This option is not available when operating under bootable media.
The option enables you to receive WinPopup notifications about the backup task's successful
completion, failure or need for interaction.
The preset is: Disabled.
Before configuring WinPopup notifications, make sure the Messenger service is started on both the
machine executing the task and the machine that will receive messages.
The Messenger service is not started by default in the Microsoft Windows Server 2003 family.
Change the service Startup mode to Automatic and start the service.
To configure WinPopup notifications:
1. Select the Send WinPopup notifications check box.
2. In the Machine name field, enter the name of the machine to which notifications will be sent.
Multiple names are not supported.
Under Send notifications, select the appropriate check boxes as follows:
 When backup completes successfully – to send notification when the backup operation is
completed successfully
 When backup fails – to send notification when the backup operation is failed
The When user interaction is required check box – to send notification during the operation
when user interaction is required – is always selected.
Click Send test WinPopup message to check if the settings are correct.
3.3.1.9 Event tracing
It is possible to send log events of the backup operations, performed on the managed machine, to
the specified SNMP managers.
SNMP notifications
This option is effective for both Windows and Linux operating systems.
This option is not available when operating under the bootable media.
The option defines whether the agent(s) operating on the managed machine have to send the log
events of the backup operations to the specified Simple Network Management Protocol (SNMP)
managers. You can choose the types of events to be sent.
Acronis Backup & Recovery 10 provides the following Simple Network Management Protocol (SNMP)
objects to SNMP management applications:
1.3.6.1.4.1.24769.100.200.1.0 - string identifying the type of event (Information, Warning, Error)