Manualshelf

User`s guide

ManualsBrandsACRONIS ManualsSoftwareBackup & Recovery 10 Server for Windows
71727374757677787980
Copyright © Acronis, Inc., 2000-2010 75
For example, if the network location becomes unavailable or not reachable, the program will attempt
to reach the location every 30 seconds, but no more than 5 times. The attempts will be stopped as
soon as the connection is resumed OR the specified number of attempts is performed, depending on
which comes first.
Additional settings
Specify the additional settings for the recovery operation by selecting or clearing the following check
boxes.
Set current date and time for recovered files
This option is effective only when recovering files.
The preset is Enabled.
This option defines whether to recover the files’ date and time from the archive or assign the files
the current date and time.
Validate backup before recovery
The preset is Disabled.
This option defines whether to validate a backup to ensure that the backup is not corrupted, before
data is recovered from it.
Check file system after recovery
This option is effective only when recovering disks or volumes.
When operating under bootable media, this option is not effective for the NTFS file system.
The preset is Disabled.
This option defines whether to check the integrity of the file system after a disk or volume recovery.
Restart machine automatically if it is required for recovery
This option is effective when recovery takes place on a machine running an operating system.
The preset is Disabled.
The option defines whether to reboot the machine automatically if it is required for recovery. Such
might be the case when a volume locked by the operating system has to be recovered.
Reboot machine after recovery
This option is effective when operating under bootable media.
The preset is Disabled.
This option enables booting the machine into the recovered operating system without user
interaction.
Change SID after the recovery is finished
This option is not effective when recovering to a virtual machine, unless an agent is installed in the
guest system or the machine is booted using the bootable media.
The preset is Disabled.