Acronis® Backup & Recovery ™ 10 Workstation Update 3 User's Guide
Copyright © Acronis, Inc., 2000-2010. All rights reserved. “Acronis” and “Acronis Secure Zone” are registered trademarks of Acronis, Inc. "Acronis Compute with Confidence", “Acronis Startup Recovery Manager”, “Acronis Active Restore” and the Acronis logo are trademarks of Acronis, Inc. Linux is a registered trademark of Linus Torvalds. VMware and VMware Ready are trademarks and/or registered trademarks of VMware, Inc. in the United States and/or other jurisdictions.
Table of contents 1 Introducing Acronis® Backup & Recovery™ 10 ........................................................................7 1.1 Acronis Backup & Recovery 10 overview ..................................................................................7 1.2 Getting started...........................................................................................................................7 1.2.1 1.3 Acronis Backup & Recovery 10 components ................................................
3.3.1 3.3.2 4 Vaults .................................................................................................................................. 80 4.1 Personal vaults .........................................................................................................................81 4.1.1 4.1.2 4.2 Operations with archives stored in a vault.................................................................................................. 84 Operations with backups .......................
6.3.8 6.3.9 6.3.10 6.3.11 6.4 Validating vaults, archives and backups ................................................................................159 6.4.1 6.4.2 6.4.3 6.4.4 6.4.5 6.4.6 6.5 When to recover ......................................................................................................................................... 153 Universal Restore ........................................................................................................................................
7.1.7 7.1.8 7.2 Where do I start? ...................................................................................................................221 7.3 Choosing a subscription .........................................................................................................221 7.4 Activating online backup subscriptions .................................................................................222 7.4.1 7.4.2 8 Large Scale Recovery FAQ ..............................................
1 Introducing Acronis® Backup & Recovery™ 10 1.1 Acronis Backup & Recovery 10 overview Based on Acronis’ patented disk imaging and bare metal restore technologies, Acronis Backup & Recovery 10 succeeds Acronis True Image Echo as the next generation disaster recovery solution.
3. Connect the console to the machine where the agent is installed. Where to go from here For what to do next see "Basic concepts (p. 18)". For understanding of the GUI elements see the next section. 1.2.1 Using the management console As soon as the console connects to a managed machine (p. 236) or to a management server (p.
tree, or on the Actions and Tools pane. Menu bar Appears across the top of the program window and lets you perform all the operations, available on both panes. Menu items change dynamically. 1024x768 or higher display resolution is required for comfortable work with the management console. 1.2.1.1 "Navigation" pane The navigation pane includes the Navigation tree and the Shortcuts bar. Navigation tree The Navigation tree enables you to navigate across the program views.
1.2.1.2 "Actions and tools" pane The Actions and tools pane enables you to easily and efficiently work with Acronis Backup & Recovery 10. The pane's bars provide quick access to program's operations and tools. All items of the Actions and tools bar are duplicated in the program menu. Bars '[Item's name]' actions Contains a set of actions that can be performed on the items selected in any of the navigation views. Clicking the action opens the respective action page (p. 13).
"Actions" bar on a managed machine and on a management server Tools Contains a list of the Acronis tools. Always the same across all the program views. All the tools can also be accessed in the Tools menu. "Tools" bar Help Contains a list of help topics. Different views and action pages of Acronis Backup & Recovery 10 provided with lists of specific help topics. 1.2.1.
and action pages according the items you select in the menu, Navigation tree, or on the Actions and Tools pane. Views A view appears on the main area when clicking any item in the Navigation tree in the Navigation pane (p. 9). "Tasks" view Common way of working with views Generally, every view contains a table of items, a table toolbar with buttons, and the Information panel.
Action pages An action page appears in the main area when clicking any action item in the Actions menu, or in the Actions bar on the Actions and tools pane. It contains steps you need to perform in order to create and launch any task, or a backup plan, or backup policy. Action page - Create backup plan Using controls and specifying settings The action pages offer two ways of representation: basic and advanced. The basic representation hides such fields as credentials, comments, etc.
Acronis Backup & Recovery 10 remembers the changes you made on the action pages. For example, if you started to create a backup plan, and then for any reason switched to another view without accomplishing the plan creation, you can click the Back navigation button on the menu. Or, if you have passed several steps forward, click the Down arrow and select the page where you started the plan creation from the list. Thus, you can perform the remaining steps and accomplish the backup plan creation.
File backup File-level data protection is based on backing up files and folders residing on the machine where the agent is installed or on a network share. Files can be recovered to their original location or to another place. It is possible to recover all files and folders that were backed up or select which of them to recover.
NTFS ReiserFS4 - volume recovery without the volume resize capability; particular files cannot be recovered from disk backups located on Acronis Backup & Recovery 10 Storage Node XFS - volume recovery without the volume resize capability; particular files cannot be recovered from disk backups located on Acronis Backup & Recovery 10 Storage Node JFS - particular files cannot be recovered from disk backups located on Acronis Backup & Recovery 10 Storage Node Linux SWAP Ext2/Ext3/Ext4 R
Workstation 80 MB 1 GB 500 MB Bootable Media Builder (Windows) 80 MB 700 MB 300 MB Media type Memory ISO image size Additional Based on Windows PE 512 MB 300 MB Linux-based 256 MB 130 MB 1024*768 pixels or higher Bootable media 1.7 Technical Support Maintenance and Support Program If you need assistance with your Acronis product, please go to http://www.acronis.
2 Understanding Acronis Backup & Recovery 10 This section attempts to give its readers a clear understanding of the product so that they can use the product in various circumstances without step-by-step instructions. 2.1 Basic concepts Please familiarize yourself with the basic notions used in the Acronis Backup & Recovery 10 graphical user interface and documentation. Advanced users are welcome to use this section as a step-by-step quick start guide. The details can be found in the context help.
The following diagram illustrates the notions discussed above. For more definitions please refer to the Glossary. 19 Copyright © Acronis, Inc.
Backup using bootable media You can boot the machine using the bootable media, configure the backup operation in the same way as a simple backup plan and execute the operation. This will help you extract files and logical volumes from a system that failed to boot, take an image of the offline system or back up sector-bysector an unsupported file system. Recovery under operating system When it comes to data recovery, you create a recovery task on the managed machine.
The following diagram illustrates data recovery under the operating system (online). No backup can proceed on the machine while the recovery operation is taking place. If required, you can connect the console to another machine and configure a recovery operation on that machine. This ability (remote parallel recovery) first appeared in Acronis Backup & Recovery 10; the previous Acronis products do not provide it.
If the machine fails to boot or you need to recover data to bare metal, you boot the machine using the bootable media and configure the recovery operation in the same way as the recovery task. The following diagram illustrates the recovery using the bootable media. 2.2 Full, incremental and differential backups Acronis Backup & Recovery 10 provides the capability to use popular backup schemes, such as Grandfather-Father-Son and Tower of Hanoi, as well as to create custom backup schemes.
It is widely accepted that a full backup is the slowest to do but the fastest to restore. With Acronis technologies, recovery from an incremental backup may be not slower than recovery from a full one. A full backup is most useful when: you need to roll back the system to its initial state this initial state does not change often, so there is no need for regular backup.
Parameter Full backup Differential backup Incremental backup Storage space Maximal Medium Minimal Creation time Maximal Medium Minimal Recovery time Minimal Medium Maximal 2.3 User privileges on a managed machine When managing a machine running Windows, the scope of a user's management rights depends on the user's privileges on the machine.
When a user opens a plan or task for editing, which is owned by another user, all passwords set in the task are cleared. This prevents the "modify settings, leave passwords" trick. The program displays a warning each time you are trying to edit a plan (task) last modified by another user. On seeing the warning, you have two options: Click Cancel and create your own plan or task. The original task will remain intact. Continue editing.
“sons”; weekly backups are referred to as “fathers”; the longest lived monthly backups are called “grandfathers”. GFS as a tape rotation scheme GFS was initially created and is often referred to as a tape rotation scheme. Tape rotation schemes, as such, do not provide automation. They just determine: how many tapes you need to enable recovery with the desired resolution (time interval between recovery points) and roll-back period which tapes you should overwrite with the forthcoming backup.
The schedule marked out according to the GFS scheme. Schedule: Workdays at 8:00 PM Weekly/Monthly: Friday Acronis uses incremental and differential backups that help save storage space and optimize the cleanup so that consolidation is not needed. In terms of backup methods, weekly backup is differential (Dif), monthly backup is full (F) and daily backup is incremental (I). The first backup is always full. The Weekly/Monthly parameter splits the total schedule into daily, weekly and monthly schedules.
“D” stands for the backup that is considered Daily. “W” stands for the backup that is considered Weekly. “M” stands for the backup that is considered Monthly. An ideal archive created according to the GFS scheme. Schedule: Workdays at 8:00 PM Weekly/Monthly: Friday Keep daily backups: 7 days Keep weekly backups: 2 weeks Keep monthly backups: 6 months Starting from the third week, weekly backups will be regularly deleted. After 6 months, monthly backups will start to be deleted.
The backups that outlive their nominal lifetime because of dependencies are marked pink. The initial full backup will be deleted as soon as all differential and incremental backups based on this backup are deleted. An archive created according to the GFS scheme by Acronis Backup & Recovery 10. Schedule: Workdays at 8:00 PM Weekly/Monthly: Friday Keep daily backups: 7 days Keep weekly backups: 2 weeks Keep monthly backups: 6 months 2.
For example, if there are five rings labeled A, B, C, D, and E in the puzzle, the solution gives the following order of moves: The Tower of Hanoi backup scheme is based on the same patterns. It operates with Sessions instead of Moves and with Backup levels instead of Rings. Commonly an N-level scheme pattern contains (Nth power of two) sessions. So, the five-level Tower of Hanoi backup scheme cycles the pattern that consists of 16 sessions (moves from 1 to 16 in the above figure).
the pattern starts with a full backup since the very first backup cannot be incremental an old backup on a level is kept until a new backup has been successfully created on the level. the scheme forces every backup level to keep only the most recent backup, other backups from the level have to be deleted; however backup deletion is postponed in cases where the backup is a base for another incremental or differential one The table shows the pattern for the five-level backup scheme.
1. Delete backups older than This is a time interval counted back from the moment when the retention rules are applied. Every time a retention rule is applied, the program calculates the date and time in the past corresponding to this interval and deletes all backups created before that moment. None of the backups created after this moment will be deleted. 2. Keep the archive size within This is the maximum size of the archive.
Combination of rules 1 and 2 You can limit both the backups’ lifetime and the archive size. The diagram below illustrates the resulting rule. Example Delete backups older than = 3 Months Keep the archive size within = 200GB Never delete backups younger than = 10 Days Every time the retention rules are applied, the program will delete all backups created more than 3 months (or more exactly, 90 days) ago.
Please be aware that consolidation is just a method of deletion but not an alternative to deletion. The resulting backup will not contain data that was present in the deleted backup and was absent from the retained incremental or differential backup. Backups resulting from consolidation always have maximum compression. This means that all backups in an archive may acquire the maximum compression as a result of repeated cleanup with consolidation.
Recovering dynamic volumes A dynamic volume can be recovered over any type of existing volume to unallocated space of a disk group to unallocated space of a basic disk. Recovery over an existing volume When a dynamic volume is recovered over an existing volume, either basic or dynamic, the target volume’s data is overwritten with the backup content. The type of target volume (basic, simple/spanned, striped, mirrored, RAID 0+1, RAID 5) will not change.
Unallocated space (basic GPT disk) Basic GPT volume Basic GPT volume Basic GPT volume Moving and resizing volumes during recovery You can resize the resulting basic volume, both MBR and GPT, during recovery, or change the volume's location on the disk. A resulting dynamic volume cannot be moved or resized. Preparing disk groups and volumes Before recovering dynamic volumes to bare metal you should create a disk group on the target hardware.
device (tape drive or tape library) by... Agent for Windows Agent for Linux Tape written on a tape device through... Backup Server Storage Node 2.9.2 ATIE 9.1 ATIE 9.5 ATIE 9.7 ABR10 ATIE 9.1 ATIE 9.5 ATIE 9.7 ABR10 ATIE 9.1 ATIE 9.5 ATIE 9.7 ABR10 + + + + + + + - + + + + + + + - + + + + + + + - + + + + + + + + + + + + Using a single tape drive A tape drive that is locally attached to a managed machine can be used by local backup plans as a storage device.
6. Acronis Active Restore (p. 227) is not available when recovering from a tape. Recovery from a locally attached tape device Before creating a recovery task, insert or mount the tape containing the backup you need to recover. When creating a recovery task, select the tape device from the list of available locations and then select the backup. After recovery is started, you will be prompted for other tapes if the tapes are needed for recovery. 2.
Type of event OID: 1.3.6.1.4.1.24769.100.200.1.0 Value: "Unknown" Text description of the event OID: 1.3.6.1.4.1.24769.100.200.2.0 Value: "?00000000" 2.11 Proprietary Acronis technologies This section describes the proprietary technologies inherited by Acronis Backup & Recovery 10 from Acronis True Image Echo and Acronis True Image 9.1 product families. 2.11.
With the new Acronis Secure Zone behavior, you obtain the ability to: list archives located in the zone and backups contained in each archive examine a backup's content mount a disk backup to copy files from the backup to a physical disk safely delete archives and backups from the archives. For more information about operations available in Acronis Secure Zone, see the Personal vaults (p. 81) section.
2.11.3 Universal Restore (Acronis Backup & Recovery 10 Universal Restore) Acronis Backup & Recovery 10 Universal Restore is the Acronis proprietary technology that helps recover and boot up Windows on dissimilar hardware or a virtual machine. The Universal Restore handles differences in devices that are critical for the operating system start-up, such as storage controllers, motherboard or chipset.
Universal Restore and Microsoft Sysprep Universal Restore is not a system preparation tool. You can apply it to any Windows image created by Acronis products, including images of systems prepared with Microsoft System Preparation Tool (Sysprep). The following is an example of using both tools on the same system.
How it works When configuring a recovery operation, you select disks or volumes to recover from a backup. Acronis Backup & Recovery 10 scans the selected disks or volumes in the backup. If this scan finds a supported operating system, the Acronis Active Restore option becomes available. If you do not enable the option, the system recovery will proceed in the usual way and the machine will become operational after the recovery is completed.
5. Once the system recovery is started, the operating system boots from the backup. The Acronis Active Restore icon appears in the system tray. The machine becomes operational and ready to provide necessary services. The immediate user sees the drive tree and icons and can open files or launch applications even though they were not yet recovered.
3 Options This section covers Acronis Backup & Recovery 10 options that can be configured using Graphical User Interface. The content of this section is applicable to both stand-alone and advanced editions of Acronis Backup & Recovery 10. 3.1 Console options The console options define the way information is represented in the Graphical User Interface of Acronis Backup & Recovery 10. To access the console options, select Options > Console options from the top menu. 3.1.
The preset is: Enabled for all results. To make a setting for each result (successful completion, failure or success with warnings) individually, select or clear the respective check box. 3.1.3 Time-based alerts Last backup This option is effective when the console is connected to a managed machine (p. 236) or to the management server (p. 237). The option defines whether to alert if no backup was performed on a given machine for a period of time.
The option defines the fonts to be used in the Graphical User Interface of Acronis Backup & Recovery 10. The Menu setting affects the drop-down and context menus. The Application setting affects the other GUI elements. The preset is: System Default font for both the menus and the application interface items. To make a selection, choose the font from the respective combo-box and set the font's properties. You can preview the font's appearance by clicking the button to the right. 3.
Use the Types of events to log check box to filter the events to be logged in the Application Event Log of Windows: All events - all events (information, warnings and errors) Errors and warnings Errors only. To disable this option, clear the Log events check box. 3.2.1.2 SNMP notifications This option is effective for both Windows and Linux operating systems. This option is not available when operating under the bootable media.
3.2.1.3 Setting up SNMP services on the receiving machine Windows To install the SNMP service on a machine running Windows: 1. 2. 3. 4. 5. Start > Control Panel > Add or Remove Programs > Add/Remove Windows Components. Select Management and Monitoring Tools. Click Details. Select the Simple Network Management Protocol check box. Click OK. You might be asked for lmmib2.dll that can be found on the installation disc of your operating system.
3. In Port, specify the port number of the proxy server—for example: 80 4. If the proxy server requires authentication, specify the credentials in User name and Password. 5. To test the proxy server settings, click Test connection. If you do not know the proxy server settings, contact your network administrator or Internet service provider for assistance. Alternatively, you can try to take these settings from your Web browser’s configuration. This is how to find them in three popular browsers.
Availability of the backup options The set of available backup options depends on: The environment the agent operates in (Windows, bootable media) The type of the data being backed up (disk, file) The backup destination (networked location or local disk) The backup scheme (Back up now or using the scheduler) The following table summarizes the availability of the backup options.
Dest: removable media Dest: removable media - - Do not show messages and dialogs while processing (silent mode) + + + + Re-attempt if an error occurs + + + + Ignore bad sectors + + + + Dest: local Dest: local - - Task start conditions (p. 68) + + - - Task failure handling (p.
To protect the archive from unauthorized access 1. 2. 3. 4. Select the Set password for the archive check box. In the Enter the password field, type a password. In the Confirm the password field, re-type the password.
Exclude files matching the following criteria Select this check box to skip files and folders whose names match any of the criteria — called file masks — in the list; use the Add, Edit, Remove and Remove All buttons to create the list of file masks. You can use one or more wildcard characters * and ? in a file mask: The asterisk (*) substitutes for zero or more characters in a file name; for example, the file mask Doc*.txt yields files such as Doc.txt and Document.
The following scheme illustrates when pre/post commands are executed. Pre-backup command Backup Post-backup command Examples of how you can use the pre/post commands: delete some temporary files from the disk before starting backup configure a third-party antivirus product to be started each time before the backup starts copy an archive to another location after the backup ends. The program does not support interactive commands, i.e. commands that require user input (for example, "pause").
execution fails. Post-backup command To specify a command/executable file to be executed after the backup is completed 1. In the Command field, type a command or browse to a batch file. 2. In the Working directory field, specify a path to a directory where the command/batch file will be executed. 3. In the Arguments field, specify the command execution arguments, if required. 4.
3. Click OK. Pre-data capture command To specify a command/batch file to be executed before data capture 1. In the Command field, type a command or browse to a batch file. The program does not support interactive commands, i.e. commands that require user input (for example, "pause".) 2. In the Working directory field, specify a path to a directory where the command/batch file will be executed. 3. In the Arguments field specify the command’s execution arguments, if required. 4.
Result Preset Continue the backup after the Continue the backup command is only after the executed despite command is command successfully execution failure executed. Delete the or success. TIB file and temporary files and fail the task if the command execution fails. 3.3.1.5 N/A Continue the backup concurrently with the command execution and irrespective of the command execution result.
When this option is set to Enable, snapshots of all volumes being backed up will be created simultaneously. Use this option to create a time-consistent backup of data spanned across multiple volumes, for instance for an Oracle database. When this option is set to Disable, the volumes' snapshots will be taken one after the other. As a result, if the data spans across several volumes, the resulting backup may be not consistent. 3.3.1.
The optimal data compression level depends on the type of data being backed up. For example, even maximum compression will not significantly reduce the archive size if the archive contains essentially compressed files, such as .jpg, .pdf or .mp3. However, formats such as .doc or .xls will be compressed well. To specify the compression level Select one of the following: None – the data will be copied as is, without any compression. The resulting backup size will be maximal.
Backing up to a fixed hard disk (for example, to Acronis Secure Zone) may slow performance of the operating system and applications because of the large amounts of data that needs to be written to the disk. You can limit the hard disk usage by the backup process to the desired level. The preset is: Maximum.
To configure e-mail notification 1. Select the Send e-mail notifications check box to activate notifications. 2. In the E-mail addresses field, type the e-mail address to which notifications will be sent. You can enter several addresses separated by semicolons. 3.
The Messenger service is not started by default in the Microsoft Windows Server 2003 family. Change the service Startup mode to Automatic and start the service. To configure WinPopup notifications: 1. Select the Send WinPopup notifications check box. 2. In the Machine name field, enter the name of the machine to which notifications will be sent. Multiple names are not supported.
The option defines whether the agent(s) operating on the managed machine have to send the log events of the backup operations to the specified Simple Network Management Protocol (SNMP) managers. You can choose the types of events to be sent. For detailed information about using SNMP with Acronis Backup & Recovery 10, please see "Support for SNMP (p. 38)". The preset is: Use the setting set in the Machine options.
Automatic With this setting, Acronis Backup & Recovery 10 will act as follows. When backing up to a hard disk: A single backup file will be created if the destination disk's file system allows the estimated file size. The backup will automatically be split into several files if the destination disk's file system does not allow the estimated file size. Such might be the case when the backup is placed on FAT16 and FAT32 file systems that have a 4GB file size limit.
To completely eliminate this kind of problem, disable preserving file security settings in archives. The recovered files and folders will always inherit the permissions from the folder to which they are recovered or from the disk, if recovered to the root. Alternatively, you can disable recovery (p. 74) of the security settings, even if they are available in the archive. The result will be the same - the files will inherit the permissions from the parent folder.
When a recoverable error occurs, the program re-attempts to perform the unsuccessful operation. You can set the time interval and the number of attempts. The attempts will be stopped as soon as the operation succeeds OR the specified number of attempts is performed, depending on which comes first. For example, if the backup destination on the network becomes unavailable or not reachable, the program will attempt to reach the destination every 30 seconds, but no more than 5 times.
You might have to provide the access credentials for the secondary destination. Enter the credentials on prompt. 3.3.1.18 Task start conditions This option is effective in Windows and Linux operating systems. This option is not available when operating under bootable media. This option determines the program behavior in case a backup task is about to start (the scheduled time comes or the event specified in the schedule occurs), but the condition (or any of multiple conditions) is not met.
Skip the task execution Delaying a backup might be unacceptable, for example, when you need to back up data strictly at the specified time. Then it makes sense to skip the backup rather than wait for the conditions, especially if the events occur relatively often. 3.3.1.19 Task failure handling This option is effective for Windows and Linux operating systems. This option is not available when operating under the bootable media.
This option is effective when backing up to a removable media (CD, DVD, tape or floppy disk.) The preset is: Disabled. The destination CD/DVD can be ejected or the tape can be dismounted after the backup is completed. Ask for the first media while backing up to removable media This option is effective only when backing up to removable media. The option defines whether to display the Insert First Media prompt when backing up to removable media. The preset is: Enabled.
This option is effective for Windows and Linux operating systems and bootable media, when the backup destination is a deduplicating vault. The preset is: Disabled. Enabling this option turns off deduplicating backups at source, meaning that deduplication will be performed by Acronis Backup & Recovery 10 Storage Node after the backup is saved to the vault (this is called deduplication at target).
The environment the agent operates in (Windows, bootable media) The type of data being recovered (disk, file) The operating system being recovered from the disk backup The following table summarizes the availability of the recovery options. Agent for Windows Bootable media (Linux-based or PE-based) Disk recovery File recovery Disk recovery File recovery Pre/Post recovery commands (p. 73) + + PE only PE only Recovery priority (p.
+ SNMP (p. 77) 3.3.2.1 + - - Pre/Post commands This option is effective for Windows and Linux operating systems and PE-based bootable media. The option enables you to define the commands to be automatically executed before and after the data recovery. Example of how you can use the pre/post commands: launch the Checkdisk command in order to find and fix logical file system errors, physical errors or bad sectors to be started before the recovery starts or after the recovery ends.
command is executed despite successfully executed. execution failure Fail the task if the or success. command execution failed. the command execution and irrespective of the command execution result. Post-recovery command To specify a command/executable file to be executed after the recovery is completed 1. In the Command field, type a command or browse to a batch file. 2. In the Working directory field, specify a path to a directory where the command/batch file will be executed. 3.
The preset is: Recover files with their security settings. If the file NTFS permissions were preserved during backup (p. 65), you can choose whether to recover the permissions or let the files inherit the NTFS permissions from the folder to which they are recovered. 3.3.2.4 Notifications Acronis Backup & Recovery 10 provides the ability of notifying users about recovery completion through e-mail or the messaging service. E-mail This option is effective for Windows and Linux operating systems.
Port – set the port of the SMTP server. By default, the port is set to 25. User name – enter the user name. Password – enter the password. Click Send test e-mail message to check if the settings are correct. Messenger service (WinPopup) This option is effective for Windows and Linux operating systems. This option is not available when operating under bootable media.
To select whether to log the recovery operations events in the Application Event Log of Windows: Select one of the following: Use the setting set in the Machine options – to use the setting specified for the machine. For more information refer to Machine options (p. 47). Log the following event types – to log events of the recovery operations in the Application Event Log.
Do not show messages and dialogs while processing (silent mode) The preset is: Disabled. With the silent mode enabled, the program will automatically handle situations requiring user interaction where possible. If an operation cannot continue without user interaction, it will fail. Details of the operation, including errors, if any, can be found in the operation log. Re-attempt, if an error occurs The preset is: Enabled. Number of attempts: 5. Interval between attempts: 30 seconds.
The option defines whether to reboot the machine automatically if it is required for recovery. Such might be the case when a volume locked by the operating system has to be recovered. Reboot machine after recovery This option is effective when operating under bootable media. The preset is Disabled. This option enables booting the machine into the recovered operating system without user interaction.
4 Vaults A vault is a location for storing backup archives. For ease of use and administration, a vault is associated with the archives' metadata. Referring to this metadata makes for fast and convenient operations with archives and backups stored in the vault. A vault can be organized on a local or networked drive, detachable media or a tape device attached to the Acronis Backup & Recovery 10 Storage Node. There are no settings for limiting a vault size or number of backups in a vault.
4.1 Personal vaults A vault is called personal if it was created using direct connection of the console to a managed machine. Personal vaults are specific for each managed machine. Personal vaults are visible to any user that can log on to the system. A user's right to back up to a personal vault is defined by the user's permission for the folder or device where the vault is located. A personal vault can be organized on detachable or removable media.
Vault content The Vault content section contains the archives table and toolbar. The archives table displays archives and backups that are stored in the vault. Use the archives toolbar to perform actions on the selected archives and backups. The list of backups is expanded by clicking the "plus" sign to the left of the archive's name. All the archives are grouped by type on the following tabs: The Disk archives tab lists all the archives that contain disk or volume backups (images).
Explore a vault's content Click Validate a vault Click Explore. In the appearing Explorer window, examine the selected vault's content. Validate. You will be taken to the Validation (p. 159) page, where this vault is already preselected as a source. The vault validation checks all the archives stored in the vault. Delete a vault Click Delete. The deleting operation actually removes only a shortcut to the folder from the Vaults view. The folder itself remains untouched.
2. 3. 4. 5. Move the archives to vault B manually by means of a third-party file manager. Edit the backup plans that use vault A: redirect their destination to vault B. In the vaults tree, select vault B to check whether the archives are displayed. If not, click Refresh. Delete vault A. 4.2 4.2.1 Common operations Operations with archives stored in a vault To perform any operation with an archive, you have to select it first. If the archive is protected with a password, you will be asked to provide it.
All the operations described below are performed by clicking the corresponding buttons on the toolbar. These operations can be also accessed from the '[Backup name]' actions bar (on the Actions and tools pane) and from the '[Backup name]' actions item of the main menu. The following is a guideline for you to perform operations with backups. To Do View backup content in a separate window Click Recover Click View content. In the Backup Content window, examine the backup content. Recover.
The filters in this window are from the archives list of the vault view. Thus, if some filters have been applied to the archives list, only the archives and backups corresponding to these filters are displayed here. To see all content, clean all the filter fields. What happens if I delete a backup that is a base of an incremental or differential backup? To preserve archive consistency, the program will consolidate the two backups. For example, you delete a full backup but retain the next incremental one.
5 Scheduling Acronis scheduler helps the administrator adapt backup plans to the company’s daily routine and each employee’s work style. The plans’ tasks will be launched systematically keeping the critical data safely protected. The scheduler uses local time of the machine the backup plan exists on. Before creating a schedule, be sure the machine’s date and time settings are correct. Schedule To define when a task has to be executed, you need to specify an event or multiple events.
The specified period of time has passed since the last successful backup completed The scheduler behavior, in case the event occurs but the condition (or any of multiple conditions) is not met is defined by the Task start conditions (p. 68) backup option. What-ifs What if an event occurs (and a condition, if any, is met) while the previous task run has not completed? The event will be ignored.
Examples "Simple" daily schedule Run the task every day at 6PM. The schedule's parameters are thus set up as follows. 1. Every: 1 day(s). 2. Once at: 06:00:00 PM. 3. Effective: From: not set. The task will be started on the current day, if it has been created before 6PM. If you have created the task after 6 PM, the task will be started for the first time on the next day at 6 PM. To: not set. The task will be performed for an indefinite number of days.
task's recurrences is 4 hours, and between the third, fourth and fifth is 2 hours. In this case, the optimal way is to add two schedules to the task. First daily schedule 1. Every: 3 day(s). 2. Every: 4 hours. From: 08:00:00 AM Until: 12:00:00 PM. 3. Effective: From: 09/20/2009. To: not set. Second daily schedule 1. Every: 3 day(s). 2. Every: 2 hour(s). From: 03:00:00 PM Until: 07:00:00 PM. 3. Effective: From: 09/20/2009. To: not set. 5.
Examples "One day in the week" schedule Run the task every Friday at 10PM, starting from a certain date (say 05/14/2009) and ending after six months. The schedule's parameters are thus set up as follows. 1. Every: 1 week(s) on: Fri. 2. Once at: 10:00:00 PM. 3. Effective: From: 05/13/2009. The task will be started on the nearest Friday at 10 PM. To: 11/13/2009. The task will be performed for the last time on this date, but the task itself will still be available in the Tasks view after this date.
Thursday: every 3 hours from 9 AM till 9 PM Friday: twice at 12 PM and 9 PM (i.e. same as on Monday) Saturday: once at 9 PM Sunday: once at 9 PM Combining the identical times, the following three schedules can be added to the task: First schedule 1. Every: 1 week(s) on: Mon, Fri. 2. Every: 9 hours From: 12:00:00 PM Until: 09:00:00 PM. 3. Effective: From: not set. To: not set. Second schedule 1. Every 1 week(s) on: Tue, Wed, Thu. 2. Every 3 hours From 09:00:00 AM until 09:00:00 PM. 3.
Every: <...> From: <...> Until: <...> Set up how many times the task will be run during the specified time interval. For example, setting the task frequency to Every 1 hour From 10:00:00 AM until 10:00:00 PM allows the task to be run 12 times from 10 AM to 10 PM during one day. In the Effective... area, set the following settings: From: <...> Set up a date when this schedule will be enabled (an effective date).
To: 12/01/2010. Actually the task will end on the last workday of November. By setting up this date we just define that the task must be discontinued in 2010, after autumn ends in the northern hemisphere. Several monthly schedules for one task In the case when the task needs to be run on different days or weeks with different time intervals depending on the month, consider adding a dedicated schedule to every desired month or several months. Suppose that the task goes into effect on 11/01/2009.
For example, you may want to set up a backup plan that will automatically perform an emergency full backup of your data as soon as Windows discovers that your hard disk drive is about to fail. Parameters Log name Specifies the name of the log.
WindowsUpdateClient and event number 18 into the System log; the type of this event is Information. When creating the plan, type or select the following in the Schedule area: Log name: System Event source: Microsoft-Windows-WindowsUpdateClient Event type: Information Event ID: 18 Tip: To set up a similar backup plan for machines running Microsoft Windows XP, replace the text in Event source with Windows Update Agent and leave the remaining fields the same.
5.6 Conditions Conditions add more flexibility to the scheduler, enabling to execute backup tasks with respect to certain conditions. Once a specified event occurs (see the "Scheduling (p. 87)" section for the list of available events), the scheduler checks the specified condition and executes the task if the condition is met. The scheduler behavior in case the event occurs but the condition (or any of multiple conditions) is not met, is defined by the Task start conditions (p. 68) backup option.
Task start conditions: Wait until the conditions are met, Run the task anyway after 2 hour(s). As a result, (1) If the user becomes idle before 9PM, the backup task will start at 9PM. (2) If the user becomes idle between 9PM and 11PM, the backup task will start immediately after the user becomes idle. (3) If the user is still active at 11PM, the backup task starts anyway. 5.6.
Condition: Fits the time interval, from 04:30:00 PM until 10:00:00 PM. Task start conditions: Skip the task execution. As a result, (1) if the user logs off between 04:30:00 PM and 10:00:00 PM, the backup task will start immediately following the logging off. (2) if the user logs off at any other time, the task will be skipped. What if...
5.6.5 Time since last backup Applies to: Windows, Linux Enables to put a backup task run on hold until the specified time interval since the last successful backup completion passes. Example: Run the backup task at system startup, but only if more than 12 hours have passed since the last successful backup. Event: At startup, Start the task on machine startup. Condition: Time since last backup, Time since the last backup: 12 hour(s). Task start conditions: Wait until the conditions are met.
6 Direct management This section covers operations that can be performed directly on a managed machine by using the direct console-agent connection. The content of this section is applicable to both stand-alone and advanced editions of Acronis Backup & Recovery 10. 6.1 Administering a managed machine This section describes the views that are available through the navigation tree of the console connected to a managed machine, and explains how to work with each view. 6.1.
Create now will launch the Bootable Media Builder (p. 237). No backups have been created for X days Back up now The Dashboard warns you that no data was backed up on the machine for a relatively long period of time. Back up now will take you to Create a Backup Plan page where you can instantly configure and run the backup operation. To configure the time interval that is considered as critical, select Options > Console options > Time-based alerts.
Alternatively, you can review the task execution states in the Backup plans and tasks (p. 103) view and specify your decision on each task in the Information panel (or in the Task details (p. 111) window). 6.1.2 Backup plans and tasks The Backup plans and tasks view keeps you informed of data protection on a given machine. It lets you monitor and manage backup plans and tasks. A backup plan is a set of rules that specify how the given data will be protected on a given machine.
2 Running At least one task is running. No action is required. Otherwise, see 3. 3 Waiting At least one task is waiting. Otherwise, see 4. Waiting for condition. This situation is quite normal, but delaying a backup for too long is risky. The solution may be to set the maximum delay or force the condition (tell the user to log off, enable the required network connection.) Waiting while another task locks the necessary resources.
3 OK All the tasks are completed successfully. No action is required. Note that a backup plan can be OK in case none of the tasks has been started yet or some of the tasks are stopped or being stopped. These situations are considered as normal. Task states A task can be in one of the following states: Idle; Waiting; Running; Stopping; Need interaction. The initial task state is Idle.
Task state diagram Task statuses A task can have one of the following statuses: Error; Warning; OK. A task status is derived from the result of the last run of the task.
6.1.2.2 Working with backup plans and tasks Actions on backup plans and tasks The following is a guideline for you to perform operations with backup plans and tasks. To Do Create a new backup plan, or a task Click New, then select one of the following: Backup plan (p. 116) Recovery task (p. 140) Validation task (p. 159) View details of a plan/task Backup plan Click View details. In the Plan Details (p. 113) window, review the plan details. Task Click View details. In the Task Details (p.
Stop a plan/task Backup plan Click Stop. Stopping the running backup plan stops all its tasks. Thus, all the task operations will be aborted. Task Click Stop. What will happen if I stop the task? Generally, stopping the task aborts its operation (backup, recovery, validation, exporting, conversion, migration). The task enters the Stopping state first, then becomes Idle. The task schedule, if created, remains valid. To complete the operation you will have to run the task over again.
Edit a plan/task Backup plan Click Edit. Backup plan editing is performed in the same way as creation (p. 116), except for the following limitations: It is not always possible to use all scheme options, when editing a backup plan if the created archive is not empty (i.e. contains backups). 1. It is not possible to change the scheme to Grandfather-Father-Son or Tower of Hanoi. 2. If the Tower of Hanoi scheme is used, it is not possible to change the number of levels.
Delete a plan/task Backup plan Click Delete. What will happen if I delete the backup plan? The plan's deletion deletes all its tasks. Why can't I delete the backup plan? The backup plan is in the "Running" state A backup plan cannot be deleted, if at least one of its tasks is running. Do not have the appropriate privilege Without the Administrator's privileges on the machine, a user cannot delete plans owned by other users. The backup plan has a centralized origin.
Configuring backup plans and the tasks table By default, the table has six columns that are displayed, others are hidden. If required, you can hide the displayed columns and show hidden ones. To show or hide columns 1. Right-click any column header to open the context menu. The menu items that are ticked off correspond to the column headers presented in the table. 2. Click the items you want to be displayed/hidden.
Recovery (disk) Disk backup recovery Recovery (file) File and folder recovery Recovery (volume) Recovery of volumes from a disk backup Recovery (MBR) Master boot record recovery Recovery (disk to existing VM) Recovery of a disk/volume backup to an existing virtual machine Recovery (disk to new VM) Recovery of a disk/volume backup to a new virtual machine Recovery (existing VM) Recovery of a virtual machine backup to an existing virtual machine Recovery (new VM) Recovery of a virtual machine b
Progress The Progress tab is available while the task is running. It is common for all types of tasks. The tab provides information about task progress, elapsed time and other parameters. Backup plan details The Backup plan details window (also duplicated on the Information panel) aggregates in four tabs all the information on the selected backup plan. The respective message will appear at the top of the tabs, if one of the plan's tasks requires user interaction.
Validation (if selected) - events before or after which the validation is performed, and validation schedule. Backup options - backup options changed against the default values. 6.1.3 Log The Log stores the history of operations performed by Acronis Backup & Recovery 10 on the machine, or actions a user takes on the machine using the program. For instance, when a user edits a task, the respective entry is added to the log. When the program executes a task, it adds multiple entries.
View a log entry’s details 1. Select a log entry. 2. Do one of the following Click View Details. The log entry's details will be displayed in a separate window. Expand the Information panel, by clicking the chevron. Save the selected log entries to a file 1. Select a single log entry or multiple log entries. 2. Click Save Selected to File. 3. In the opened window, specify a path and a name for the file. Save all the log entries to a file 1. Make sure, that the filters are not set. 2.
Configuring the log table By default, the table has seven columns that are displayed, others are hidden. If required, you can hide the shown columns and show the hidden ones. To show or hide columns 1. Right-click any column header to open the context menu. The menu items that are ticked off correspond to the column headers presented in the table. 2. Click the items you want to be displayed/hidden. 6.1.3.
To create a backup plan, perform the following steps. General Plan name [Optional] Enter a unique name for the backup plan. A conscious name lets you identify the plan among others. Plan's credentials (p. 119) [Optional] The backup plan will run on behalf of the user who is creating the plan. You can change the plan account credentials if necessary. To access this option, select the Advanced view check box . Comments [Optional] Type a description of the backup plan.
Access credentials (p. 128) [Optional] Provide credentials for the location if the plan account does not have access permissions to the location. To access this option, select the Advanced view check box. Archive comments [Optional] Enter comments on the archive. To access this option, select the Advanced view check box. How to back up Backup scheme (p.
Virtualization server (p. 139) Here you select the resulting virtual machine type and location. Available options depend on the host you selected in the previous step. Storage (p. 139) Choose the storage on the virtualization server or the folder to place the virtual machine files in. Resultant VMs Specify the name of the virtual machine. After you have performed all the required steps, click OK to create the backup plan. After that, you might be prompted for the password (p. 119).
Files Available if the Acronis Backup & Recovery 10 Agent for Windows (or for Linux) is installed. Select this option to back up specific files and folders. If you are not concerned about recovery of the operating system along with all the settings and applications, but plan to keep safe only certain data (the current project, for example), choose file backup. This will reduce the archive size, thus saving storage space.
Windows The swap file (pagefile.sys) and the file that keeps the RAM content when the machine goes into hibernation (hiberfil.sys) are not backed up. After recovery, the files will be re-created in the appropriate place with the zero size.
6.2.6 Exclusions Set up exclusions for the specific types of files you do not wish to back up. For example, you may not want database, hidden and system files and folders, as well as files with specific extensions, to be stored in the archive. To specify which files and folders to exclude: Set up any of the following parameters: Exclude all hidden files and folders This option is effective only for file systems that are supported by Windows.
Windows By file path C:\Finance\F.log Excludes the file named "F.log" located in the folder C:\Finance By folder path C:\Finance\F\ Excludes the folder C:\Finance\F (be sure to specify the full path starting from the disk letter) Linux By file path /home/user/Finance/F.log Excludes the file named "F.log" located in the folder /home/user/Finance By folder path /home/user/Finance/ Excludes the folder /home/user/Finance 6.2.
To back up data to a locally attached tape device, expand the Tape drives group, then click the required device. 2. Using the archives table To assist you with choosing the right destination, the table displays the names of the archives contained in each location you select. While you are reviewing the location content, archives can be added, deleted or modified by another user or by the program itself according to scheduled operations. Use the Refresh button to refresh the list of archives. 3.
This behavior can be suppressed by adding the [Date] variable (p. 128) to the archive name. If you do not select the Name backup files using the archive name... check box: Each backup will have a unique file name with the exact time stamp and the backup type; for example: MyData_2010_03_26_17_01_38_960D.tib. This standard file naming allows for a wider range of backup destinations and backup schemes.
Your script can move older backups based on the date stamp. See also “The *Date+ variable” (p. 128). Example 3. Hourly backups within a day Consider the following scenario: You want to perform hourly backups of your server's critical files every day. You want to keep older backups in the archive. You want the first backup of each day to be full and to run at midnight; and the subsequent backups of the day to be differential and to run at 01:00, 02:00, and so on.
You want to swap the drives each Monday, so that one drive contains backups of the current week (Monday through Sunday), and the other drive those of the previous week. In this scenario, you need to create two backup plans as follows: a) When creating the first backup plan, specify MyMachine as the archive name and D:\ as the archive location, select the Name backup files using the archive name... check box, select Full as the backup type, and schedule the backups to run every week on Monday.
6.2.8.2 The [DATE] variable If you specify the [DATE] variable in the archive name, the file name of each backup will include that backup’s creation date. When using this variable, the first backup of a new day will be a full backup. Before creating the next full backup, the software deletes all backups taken earlier that day. Backups taken before that day are kept. This means you can store multiple full backups with or without incremental ones, but no more than one full backup per day.
The program will access the source data using the credentials of the backup plan account specified in the General section. Use the following credentials The program will access the source data using the credentials you specify. Use this option if the plan account does not have access permissions to the location. You might need to provide special credentials for a network share or a storage node vault. Specify: User name.
In the Backup type field, select whether you want to create a full, incremental or differential backup (p. 22). 6.2.10.2 Back up later scheme With the Back up later scheme, the backup will be performed only once, at the date and time you specify. Specify the appropriate settings as follows Backup type Select the type of backup: full, incremental, or differential. If there is no full backup in the archive, a full backup will be created regardless of your selection.
Feb 5—Feb 11 D D D D W - - Feb 12—Feb 18 D D D D W - - Feb 19—Feb 25 D D D D M - - Feb 26—Mar 4 D D D D W - - Daily backups run every workday except Friday, which is left for weekly and monthly backups. Monthly backups run every fourth Friday, and weekly backups run on all other Fridays. Monthly ("Grandfather") backups are full; Weekly ("Father") backups are differential; Daily ("Son") backups are incremental.
Keep monthly backups indefinitely. Backup scheme parameters can then be set up as follows. Start backup at: 11:00 PM Back up on: All days Weekly/monthly: Saturday (for example) Keep backups: Daily: 1 week Weekly: 1 month Monthly: indefinitely As a result, an archive of daily, weekly, and monthly backups will be created. Daily backups will be available for seven days since creation.
Have a weekly summary of file changes since last month (Friday weekly differential backup). Have a monthly full backup of your files. Moreover, assume that you want to retain access to all backups, including the daily ones, for at least six months.
Parameters You can set up the following parameters of a Tower of Hanoi scheme. Schedule Set up a daily (p. 88), weekly (p. 90), or monthly (p. 92) schedule. Setting up schedule parameters allows creating simple schedules (example of a simple daily schedule: a backup task will be run every 1 day at 10 AM) as well as more complex schedules (example of a complex daily schedule: a task will be run every 3 days, starting from January 15.
Number of levels Full backup every On different days, can go back Roll-back period 2 2 days 1 to 2 days 1 day 3 4 days 2 to 5 days 2 days 4 8 days 4 to 11 days 4 days 5 16 days 8 to 23 days 8 days 6 32 days 16 to 47 days 16 days Adding a level doubles the full backup and roll-back periods. To see why the number of recovery days varies, let us return to the previous example. Here are the backups we have on day 12 (numbers in gray denote deleted backups).
Incremental Specifies on what schedule and under which conditions to perform an incremental backup. If the archive contains no backups at the time of the task run, a full backup is created instead of the incremental backup. Differential Specifies on what schedule and under which conditions to perform a differential backup. If the archive contains no full backups at the time of the task run, a full backup is created instead of the differential backup.
Examples Weekly full backup The following scheme yields a full backup performed every Friday night. Full backup: Schedule: Weekly, every Friday, at 10:00 PM Here, all parameters except Schedule in Full backup are left empty. All backups in the archive are kept indefinitely (no archive cleanup is performed). Full and incremental backup plus cleanup With the following scheme, the archive will consist of weekly full backups and daily incremental backups.
Finally, we create retention rules for the archive: let us retain only backups that are no older than six months, and let the cleanup be performed after each backup task and also on the last day of every month. Retention rules: Delete backups older than 6 months Apply the rules: After backing up, On schedule Cleanup schedule: Monthly, on the Last day of All months, at 10:00 PM By default, a backup is not deleted as long as it has dependent backups that must be kept.
Validation of the archive will validate all the archive’s backups and may take a long time and a lot of system resources. 3. Validation schedule (appears only if you have selected the on schedule in step 1) - set the schedule of validation. For more information see the Scheduling (p. 87) section. 6.2.12 Setting up regular conversion to a virtual machine When creating a backup plan (p. 116), you can set up regular conversion of a disk or volume backup to a virtual machine.
Agent for Hyper-V is installed on the host You can choose between creating a virtual machine on the Hyper-V server and creating a VMware Workstation, Microsoft Virtual PC or Parallels Workstation machine in the folder you select. Virtual machines created on the Hyper-V server as a result of backup, will not appear on the management server, because such machines are not supposed to be backed up.
A dynamic volume can be recovered over an existing volume, to unallocated space of a disk group, or to unallocated space of a basic disk. To learn more about recovering dynamic volumes, please turn to the Microsoft LDM (Dynamic volumes) (p. 34) section.
after the recovery is started. The operating system boots from the backup image and the machine becomes operational and ready to provide necessary services. The data required to serve incoming requests is recovered with the highest priority; everything else is recovered in the background. See Acronis Active Restore (p. 42) for details. Files (p. 151) You may have to specify credentials for the destination. Skip this step when operating on a machine booted with bootable media. Access credentials (p.
To specify credentials 1. Select one of the following: Run under the current user The task will run under the credentials with which the user who starts the tasks is logged on. If the task has to run on schedule, you will be asked for the current user's password on completing the task creation. Use the following credentials The task will always run under the credentials you specify, whether started manually or executed on schedule. Specify: User name.
After entering access credentials, the folders on the server become available. Click the appropriate folder on the server. You can access the server as an anonymous user if the server enables such access. To do so, click Use anonymous access instead of entering credentials. According to the original FTP specification, credentials required for access to FTP servers are transferred through a network as plaintext.
The disk geometry is different to that stored in the backup. There are probably other times when you may need to recover the MBR, but the above are the most common. When recovering the MBR of one disk to another Acronis Backup & Recovery 10 recovers Track 0, which does not affect the target disk’s partition table and partition layout.
6.3.6.1 Disks Available disk destinations depend on the agents operating on the machine. Recover to: Physical machine Available when the Acronis Backup & Recovery 10 Agent for Windows or Agent for Linux is installed. The selected disks will be recovered to the physical disks of the machine the console is connected to. On selecting this, you proceed to the regular disk mapping procedure described below. New virtual machine (p. 150) If Acronis Backup & Recovery 10 Agent for Windows is installed.
NT signature When the MBR is selected along with the disk backup, you need to retain operating system bootability on the target disk volume. The operating system must have the system volume information (e.g. volume letter) matched with the disk NT signature, which is kept in the MBR disk record. But two disks with the same NT signature cannot work properly under one operating system.
If Acronis Backup & Recovery 10 Agent for Hyper-V or Agent for ESX/ESXi is installed. These agents enable creating a new virtual machine on the virtualization server you specify. The new virtual machine will be configured automatically, the source machine configuration being copied where possible. The configuration is displayed in the Virtual Machine Settings (p. 150) section. Check the settings and make changes if necessary. Then you proceed to the regular volume mapping procedure described below.
Be careful! To be on the safe side, it is advisable to assign unique names to the volumes. The Linux-style bootable media shows local disks and volumes as unmounted (sda1, sda2...). Volume properties Resizing and relocating When recovering a volume to a basic MBR disk, you can resize and relocate the volume by dragging it or its borders with a mouse or by entering corresponding values in the appropriate fields. Using this feature, you can redistribute the disk space between the volumes being recovered.
Logical drive letter (for Windows only) Assign a letter to the recovered volume. Select the desired letter from a drop-down list. With the default AUTO selection, the first unused letter will be assigned to the volume. If you select NO, no letter will be assigned to the recovered volume, hiding it from the OS.You should not assign letters to volumes that are inaccessible to Windows, such as to those other than FAT and NTFS. 6.3.6.
set by the virtualization product. You can add virtual disks to the machine configuration or, in some cases, delete the proposed disks. Implementation of Xen machines is based on Microsoft Virtual PC and inherits its limitations: up to 3 IDE disks and 1 processor. SCSI disks are not supported. Processors Initial setting: if not contained in the backup or the backed up setting is not supported by the virtualization server, the default server's setting.
By mask (*) By mask (?) *.log Excludes all files with the .log extension F* Excludes all files and folders with names starting with "F" (such as folders F, F1 and files F.log, F1.log) F???.log Excludes all .log files with names consisting of four symbols and starting with "F" Windows By file path Finance\F.log Excludes files named "F.
Password. The password for the account. 2. Click OK. 6.3.8 When to recover Select when to start the recovery task: Recover now - the recovery task will be started immediately after you click the final OK. Recover later - the recovery task will be started at the date and time you specify. If you do not need to schedule the task and wish to start it manually afterwards, select the Task will be started manually (do no schedule the task) check box. 6.3.
Universal Restore settings Automatic driver search Specify where the program will search for the Hardware Abstraction Layer (HAL), HDD controller driver and network adapter driver(s): - If the drivers are on a vendor's disc or other removable media, turn on the Search removable media. - If the drivers are located in a networked folder or on the bootable media, specify the path to the folder in the Search folder field.
With Acronis Backup & Recovery 10 Agent for Windows, you can recover a disk (volume) backup to a new virtual machine of any of the following types: VMware Workstation, Microsoft Virtual PC, Parallels Workstation or Citrix XenServer Open Virtual Appliance (OVA). Files of the new virtual machine will be placed in the folder you select. You can start the machine using the respective virtualization software or prepare the machine files for further usage.
You will be taken to the Backup plans and tasks view where you can examine the state and progress of the recovery task. Post-conversion operations The resulting machine always has SCSI disk interface and basic MBR volumes. If the machine uses a custom boot loader, you might need to configure the loader to point to the new devices and reactivate it. Configuring GRUB is described in "How to reactivate GRUB and change its configuration (p. 157)". Tip.
One part of the GRUB loader resides either in the first several sectors of the disk or in the first several sectors of the volume. The rest is on the file system of one of the volumes. System bootability can be recovered automatically only when the GRUB resides in the first several sectors of the disk and on the file system to which direct access is possible. In other cases, the user has to manually reactivate the boot loader. Solution: Reactivate the boot loader.
cp /mnt/system/boot/grub/grub.conf /mnt/system/boot/grub/grub.conf.backup 5. Edit the /mnt/system/boot/grub/menu.lst file (for Debian, Ubuntu, and SUSE Linux distributions) or the /mnt/system/boot/grub/grub.conf file (for Fedora and Red Hat Enterprise Linux distributions)—for example, as follows: vi /mnt/system/boot/grub/menu.lst 6. In the menu.lst file (respectively grub.conf), find the menu item that corresponds to the system you are recovering.
6.3.11.2 About Windows loaders Windows NT/2000/XP/2003 A part of the loader resides in the partition boot sector, the rest is in the files ntldr, boot.ini, ntdetect.com, ntbootdd.sys. boot.ini is a text file that contains the loader configuration.
To create a validation task, perform the following steps. General Task name [Optional] Enter a unique name for the validation task. A conscious name lets you quickly identify the task among the others. Credentials (p. 160) [Optional] The validation task will run on behalf of the user who is creating the task. You can change the task credentials if necessary. To access this option, select the Advanced view check box. What to validate Validate Choose an object to validate: Archive (p.
To learn more about operations available depending on the user privileges, see the User privileges on a managed machine (p. 24) section. 6.4.2 Archive selection Selecting the archive 1. Enter the full path to the location in the Path field, or select the desired folder in the folders tree. If the archive is stored in Acronis Online Backup Storage, click Log in and specify the credentials to log in to the online storage. Then expand the Online backup storage group and select the account.
While you are reviewing the location content, archives can be added, deleted or modified by another user or by the program itself according to scheduled operations. Use the Refresh button to refresh the list of archives. 3. Click OK. 6.4.3 Backup selection To specify a backup to validate 1. In the upper pane, select a backup by its creation date/time. The bottom part of the window displays the selected backup content, assisting you to find the right backup. 2. Click OK. 6.4.
The program will access the location using the credentials you specify. Use this option if the task account does not have access permissions to the location. You might need to provide special credentials for a network share or a storage node vault. Specify: User name. When entering the name of an Active Directory user account, be sure to also specify the domain name (DOMAIN\Username or Username@domain) Password. The password for the account. 2. Click OK.
Offline virus clean: if a machine is attacked, the administrator shuts it down, boots with bootable media and creates an image. Then, the administrator mounts this image in read/write mode, scans and cleans it with an antivirus program, and finally recovers the machine. Error check: if recovery failed due to a disk error, mount the image in the read/write mode. Then, check the mounted disk for errors with the chkdsk /r command. To mount an image, perform the following steps. Source Archive (p.
ftp://ftp_server:port _number or sftp://sftp_server:port number If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP. After entering access credentials, the folders on the server become available. Click the appropriate folder on the server. You can access the server as an anonymous user if the server enables such access. To do so, click Use anonymous access instead of entering credentials.
2. Click OK. According to the original FTP specification, credentials required for access to FTP servers are transferred through a network as plaintext. This means that the user name and password can be intercepted by an eavesdropper using a packet sniffer. 6.5.4 Volume selection Select the volumes to mount and configure the mounting parameters for each of the selected volumes as follows: 1. Select the check box for each volume you need to mount. 2.
6.7 Exporting archives and backups The export operation creates a copy of an archive or a self-sufficient part copy of an archive in the location you specify. The original archive remains untouched. The export operation can be applied to: a single archive - an exact archive copy will be created your choice of backups belonging to the same archive - the resulting archive will contain only the specified backups.
The resulting archive's options The exported archive inherits the options of the original archive, including encryption and the password. When exporting a password-protected archive, you are prompted for the password. If the original archive is encrypted, the password is used to encrypt the resulting archive.
Task credentials (p. 169) [Optional] The export task will run on behalf of the user who is creating the task. You can change the task credentials if necessary. To access this option, select the Advanced view check box. What to export Export Select an object to export: Archive (p. 143) - in that case, you need to specify the archive only. Backups (p. 171) - specify the archive first, and then select the desired backup(s) in this archive Access credentials (p.
To learn more about operations available depending on the user privileges, see the User privileges on a managed machine (p. 24) section. 6.7.2 Archive selection Selecting the archive 1. Enter the full path to the location in the Path field, or select the desired folder in the folders tree. If the archive is stored in Acronis Online Backup Storage, click Log in and specify the credentials to log in to the online storage. Then expand the Online backup storage group and select the account.
While you are reviewing the location content, archives can be added, deleted or modified by another user or by the program itself according to scheduled operations. Use the Refresh button to refresh the list of archives. 3. Click OK. 6.7.3 Backup selection To specify a backup(s) to export 1. At the top of the window, select the respective check box(es). To ensure that you choose the right backup, click on the backup and look at the bottom table that displays the volumes contained in the selected backup.
To export data to a personal vault, expand the Personal vaults group and click the vault. To export data to a network share, expand the Network folders group, select the required networked machine and then click the shared folder. If the network share requires access credentials, the program will ask for them. To export data to a local folder on the machine, expand the Local folders group and click the required folder.
To specify credentials 1. Select one of the following: Use the task credentials The program will access the location using the credentials of the task account specified in the General section. Use the following credentials The program will access the location using the credentials you specify. Use this option if the task account does not have access permissions to the location. You might need to provide special credentials for a network share or a storage node vault. Specify: User name.
6.8.1.1 Acronis Secure Zone Disk The Acronis Secure Zone can be located on any fixed hard drive. Acronis Secure Zone is always created at the end of the hard disk. A machine can have only one Acronis Secure Zone. Acronis Secure Zone is created using unallocated space, if available, or at the expense of the volumes' free space. The Acronis Secure Zone cannot be organized on a dynamic disk or a disk using the GPT partitioning style. To allocate space for Acronis Secure Zone 1.
6.8.1.4 Result confirmation The Result confirmation window displays the expected partition layout according to the settings you have chosen. Click OK, if you are satisfied with the layout and the Acronis Secure Zone creation will start. How the settings you make will be processed This helps you to understand how creating the Acronis Secure Zone will transform a disk containing multiple volumes. Acronis Secure Zone is always created at the end of the hard disk.
3. Specify the new size of the zone by: dragging the slider and selecting any size between the current and maximum values. The maximum size is equal to the disk’s unallocated space plus the total free space of all selected partitions; typing an exact value in the Acronis Secure Zone Size field. When increasing the size of the zone, the program will act as follows: first, it will use the unallocated space. Volumes will be moved, if necessary, but not resized.
(if you have GRUB). If the system fails to boot, you will be able to start the bootable rescue utility, by pressing F11 or by selecting it from the menu, respectively. The system disk (or, the /boot partition in Linux) should have at least 70 MB of free space to activate Acronis Startup Recovery Manager. Unless you use the GRUB boot loader and it is installed in the Master Boot Record (MBR), Acronis Startup Recovery Manager activation overwrites the MBR with its own boot code.
PE-based bootable media PE-based bootable media contains a minimal Windows system called Windows Preinstallation Environment (WinPE) and Acronis Plug-in for WinPE, that is, a modification of Acronis Backup & Recovery 10 Agent that can run in the preinstallation environment. WinPE proved to be the most convenient bootable solution in large environments with heterogeneous hardware.
Bootable Media or, as a separate component. The wizard will guide you through the necessary operations. Please refer to Adding the Acronis Plug-in to WinPE 1.x (p. 183) for details. To be able to create or modify PE 2.x or 3.0 images, install Bootable Media Builder on a machine where Windows Automated Installation Kit (AIK) is installed. The further operations are described in the Adding the Acronis Plug-in to WinPE 2.x or 3.0 (p. 184) section. If you do not have a machine with WAIK, prepare as follows: 1.
If not configured, the Acronis loader waits for someone to select whether to boot the operating system (if present) or the Acronis component. If you set, say, 10 sec. for the bootable agent, the agent will launch 10 seconds after the menu is displayed. This enables unattended onsite operation when booting from a PXE server or WDS/RIS. 4. [optional] Remote logon settings: user name and password to be entered on the console side at connection to the agent.
vga=mode_number Specifies the video mode to be used by the bootable media's graphical user interface. The mode number is given by mode_number in the hexadecimal format—for example: vga=0x318 Screen resolution and the number of colors corresponding to a mode number may be different on different machines. We recommend using the vga=ask parameter first to choose a value for mode_number.
These calls might not work properly on some machines. But this may be the only way to get the interrupt routing table. Network settings While creating Acronis bootable media, you have an option to pre-configure network connections that will be used by the bootable agent. The following parameters can be pre-configured: IP address Subnet mask Gateway DNS server WINS server. Once the bootable agent starts on a machine, the configuration is applied to the machine’s network interface card (NIC.
the default port the currently used port the new port (enter the port number). If the port has not been pre-configured, the agent uses the default port number (9876.) This port is also used as default by the Acronis Backup & Recovery 10 Management Console. Drivers for Universal Restore While creating bootable media, you have an option to add Windows drivers to the media.
To add Acronis Plug-in to WinPE 1.x: 1. Unpack all files of your WinPE 1.x ISO to a separate folder on the hard disk. 2. Start the Bootable Media Builder either from the management console, by selecting Tools > Create Bootable Media or, as a separate component. 3. Select Bootable media type: Windows PE. 4. 5. 6. 7. 8. Select Use WinPE files located in the folder I specify Specify path to the folder where the WinPE files are located. Specify network settings (p.
4. Specify network settings (p. 182) for the machine network adapters or choose DHCP auto configuration. 5. [optional] Specify Windows drivers to be added to Windows PE. Once you boot a machine into Windows PE, the drivers can help you access the device where the backup archive is located. Click Add and specify the path to the necessary *.inf file for a corresponding SCSI, RAID, SATA controller, network adapter, tape drive or other device.
11. Specify the output folder and the full path to the resulting ISO file including the file name or the media to create. 12. Build the Bart PE. 13. Burn the ISO to CD or DVD (if this has not been done yet) or copy to a flash drive. Once the machine boots into the Bart PE and you configure the network connection, select Go -> System -> Storage -> Acronis Backup & Recovery 10 to start. 6.10.
After entering access credentials, you will see a list of archives located in the vault. 6.10.3.1 Setting up a display mode For a machine booted from media, a display video mode is detected automatically based on the hardware configuration (monitor and graphics card specifications). If, for some reason, the video mode is detected incorrectly, do the following: 1. In the boot menu, press F11. 2. Add to the command prompt the following command: vga=ask, and then proceed with booting. 3.
6.10.4 List of commands and utilities available in Linux-based bootable media Linux-based bootable media contains the following commands and command line utilities, which you can use when running a command shell. To start the command shell, press CTRL+ALT+F2 while in the bootable media's management console.
grep ping umount growisofs pktsetup uuidgen grub poweroff vconfig gunzip ps vi halt raidautorun zcat hexdump readcd hotplug reboot 6.10.5 Recovering MD devices and logical volumes To recover MD devices, known as Linux Software RAID, and/or devices created by Logical Volume Manager (LVM), known as logical volumes, you need to create the corresponding volume structure before starting the recovery.
To create the volume structure by using a script 1. Boot the machine from a Linux-based bootable media. 2. Click Acronis Bootable Agent. Then, click Run management console. 3. On the toolbar, click Actions, and then click Start shell. Alternatively, you can press CTRL+ALT+F2. 4. Run the restoreraids.sh script, specifying the full file name of the archive—for example: /bin/restoreraids.sh smb://server/backups/linux_machine_2010_01_02_12_00_00_123D.tib 5.
Example Suppose that you previously performed a disk backup of a machine with the following disk configuration: The machine has two 1-gigabyte and two 2-gigabyte SCSI hard disks, mounted on /dev/sda, /dev/sdb, /dev/sdc, and /dev/sdd, respectively. The first and second pairs of hard disks are configured as two MD devices, both in the RAID-1 configuration, and are mounted on /dev/md0 and /dev/md1, respectively.
--- Volume group --VG Name my_volgroup ... VG Access read/write VG Status resizable ... VG Size 1.99 GB ... VG UUID 0qoQ4l-Vk7W-yDG3-uF1l-Q2AL-C0z0-vMeACu 5. Run the following command to create the logical volume; in the -L parameter, specify the size given by VG Size: lvm lvcreate -L1.99G --name my_logvol my_volgroup 6. Activate the volume group by running the following command: lvm vgchange -a y my_volgroup 7. Press CTRL+ALT+F1 to return to the management console. Step 2: Starting the recovery 1. 2. 3.
2. Use the --mount command, specifying the volume's index in the -i parameter. For example: trueimagemnt --mount /mnt --filename smb://server/backups/linux_machine.tib -i 4 This command mounts the logical volume DYN1, whose index in the backup is 4, on the mount point /mnt. To unmount a backup volume Use the --unmount command, specifying the volume's mount point as a parameter. For example: trueimagemnt --unmount /mnt 6.
6.11.2 Running Acronis Disk Director Lite You can run Acronis Disk Director Lite under Windows or start it from a bootable media. Running Acronis Disk Director Lite under Windows If you run Acronis Backup & Recovery 10 Management Console, and connect it to a managed machine, the Disk management view will be available in the Navigation tree of the console, with which you can start Acronis Disk Director Lite.
Starting the operations Any operation can be launched: From the volume or disk context menu (both in the table and the graphic panel) From the Disk management menu of the console From the Operations bar on the Actions and Tools pane Note that the list of available operations in the context menu, the Disk management menu, and the Operations bar depends on the selected volume or disk type. The same is true for unallocated space as well.
3. In the window, you will be able to set the disk partitioning scheme (MBR or GPT) and the disk type (basic or dynamic). The new disk state will be graphically represented in the Disk Management view of the console immediately. 4. By clicking OK, you'll add a pending operation of the disk initialization. (To finish the added operation you will have to commit (p. 207) it. Exiting the program without committing the pending operations will effectively cancel them.
But with the wide range of available hardware it is normal that the target disk would differ in size from the source. If the destination is larger, then it would be advisable to resize the source disk volumes to avoid leaving unallocated space on the target disk by selecting the Proportionally resize volumes option.
5. Wait until the machine is turned off. 6. Disconnect either the source or the target hard disk drive from the machine. 7. Start up the machine. If you need to leave an NT signature: 1. 2. 3. 4. 5. Click to clear the Copy NT signature check box, if necessary. Click to clear the Turn off the machine after the cloning operation check box, if necessary. Click Finish to add the pending operation. Click Commit on the toolbar and then click Proceed in the Pending Operations window.
If you need to convert a GPT disk to MBR: 1. Select a GPT disk to convert to MBR. 2. Right-click on the selected volume, and then click Convert to MBR in the context menu. You will receive a warning window, stating that you are about to convert GPT into MBR. You will be explained the changes that will happen to the system after the chosen disk is converted from GPT to MBR. E.g.
6.11.5.6 Disk conversion: dynamic to basic You would want to convert dynamic disks back to basic ones, e.g. if you want to start using an OS on your machine that does not support dynamic disks. If you need to convert a dynamic disk to basic: 1. Select the dynamic disk to convert to basic. 2. Right-click on the selected volume, and then click Convert to basic in the context menu. You will receive a final warning about the dynamic disk being converted to basic.
Online The online status means that a disk is accessible in the read-write mode. This is the normal disk status. If you need a disk to be accessible in the read-only mode, select the disk and then change its status to offline by selecting Change disk status to offline from the Operations menu. Offline The offline status means that a disk is accessible in the read-only mode. To bring the selected offline disk back to online, select Change disk status to online from the Operations menu.
Types of dynamic volumes Simple Volume A volume created from free space on a single physical disk. It can consist of one region on the disk or several regions, virtually united by the Logical Disk Manager (LDM). It provides no additional reliability, no speed improvement, nor extra size. Spanned Volume A volume created from free disk space virtually linked together by the LDM from several physical disks.
Its pages will enable you to enter operation parameters, proceeding step-by-step further on and return to any previous step if necessary to change any previously selected options. To help you with your choices, each parameter is supplemented with detailed instructions. If you want to create a volume: Run the Create volume wizard by selecting Create volume on the Wizards bar, or right-click any unallocated space and select Create volume in the appearing context menu.
If you are creating a dynamic volume and select one or several basic disks, as its destination, you will receive a warning that the selected disk will be converted to dynamic automatically. If need be, you will be prompted to add the necessary number of disks to your selection, according to the chosen type of the future volume. If you click the Back button, you will be returned to the previous page: Select the type of volume being created (p. 203).
A Basic disk can contain up to four primary volumes. If they already exist, the disk will have to be converted into dynamic, otherwise or Active and Primary options will be disabled and you will only be able to select the Logical volume type. The warning message will advise you that an OS installed on this volume will not be bootable.
Please note, that due to setting the new active volume, the former active volume letter might be changed and some of the installed programs might stop running. 3. If another active volume is present in the system, you will receive the warning that the previous active volume will have to be set passive first. By clicking OK in the Warning window, you'll add the pending operation of setting active volume.
3. By clicking OK in the Change label window, you'll add the pending operation of changing the volume label . If when setting a new volume label you use characters that are unsupported by the currently installed operating system, you will get the appropriate warning and the OK button will be disabled. You will have to use only supported characters to proceed with changing the volume label. (To finish the added operation you will have to commit (p. 207) it.
The Disk management view contains the toolbar with icons to launch the Undo, Redo and Commit actions intended for pending operations. These actions might also be launched from the Disk management menu of the console. All planned operations are added to the pending operation list. The Undo action lets you undo the latest operation in the list. While the list is not empty, this action is available. The Redo action lets you reinstate the last pending operation that was undone.
7 Online backup This section provides details about using the Acronis Backup & Recovery 10 Online service. This service enables you to do online backups to Acronis Online Backup Storage. Acronis Backup & Recovery 10 Online might be unavailable in your region. To find more information, click here: http://www.acronis.
7.1.3 How long will my backups be kept in the online storage? Your backups remain in the online storage until you delete them or until the subscription expires. Recovering data from the online storage is possible for 30 days following the subscription expiration date. For effective use of the storage space, you have the option to set up the "Delete backups older than" retention rule. Example You might want to use the following backup strategy for a file server.
7.1.5.3 Can I use Acronis Universal Restore when recovering a system from the online storage? Yes. Acronis Universal Restore is always available when recovering a system from the online storage. Using Acronis Universal Restore when recovering from other types of storage will require a separate license. 7.1.5.4 What if a network connection is lost during online backup or recovery? The software will try to reach the online storage every 30 seconds.
7.1.6.1 What is Initial Seeding? Initial Seeding is an extra service that lets you save an initial full backup locally and then send it to Acronis on a hard disk drive. Acronis uploads the backup to the online storage. After that, you can add incremental backups to this full backup, either manually or on a schedule. The hard disk drive is sent back to you but it is not possible to recover from it. However, recovery from a locally attached device is possible with the Large scale recovery (p. 217) option.
Having purchased a license from an Acronis partner, you receive a confirmation e-mail with a registration code. Click Enter new registration code on the same web page and register the license. The license becomes available on the Initial Seeding / Recovery tab. A license purchased in Acronis online store becomes available immediately after the payment is processed. 7.1.6.8 How to perform initial seeding? 1. Decide on the media (p. 212) that you will send. 2.
Packaging If possible, use the original packaging. Otherwise, packaging materials can be obtained at any shipping outlet or stationary store. The following are instructions about how to package your hard disk drive. Step 1 Delicately remove your hard disk drive from the machine. Step 2 Place the hard drive into an anti-static bag to protect the drive from electrostatic discharge. If you do not have an anti-static bag, simply wrap the hard drive into aluminum foil.
Step 4 Choose the transport company that you will use for shipping. On this company's web site, prepare and print two prepaid shipping labels: 1. Shipping label for sending your hard drive. This label is placed on the top of the box. You should send your package to one of the Acronis data centers. The data center address can be obtained on the Initial seeding/Recovery tab of your account management page by clicking Show data center address.
Step 5 Securely seal the box with a sturdy tape. Then, stick the shipping label for sending your hard drive to the top of the box, so the label does not wrap around the edge of the package. 7.1.6.10 How do I track an Initial Seeding order status? On the Acronis Web site, the Initial Seeding / Recovery tab shows you the status of all your orders. In addition, you will receive e-mail notifications about the most important events. Available – The license is available for using on any machine.
The order has been completed. The media has been returned (or: Returning the media was not requested) – Your media has been shipped back (the carrier and the tracking number are specified). If a prepaid shipping label was not provided with the media, the media will be discarded. [Occasional] The order is on hold – Your order was placed on hold due to technical difficulties processing the order. Acronis is working on resolving these issues.
7.1.7.6 Can I obtain backups taken from a number of machines on a single hard drive? No. A separate hard drive is required for each machine. 7.1.7.7 How to buy a Large Scale Recovery license? You can buy a Large Scale Recovery license from an Acronis partner or in Acronis online store. Follow the link www.acronis.com/my/backup-recovery-online/#buy http://www.acronis.com/my/backuprecovery-online/#buy to locate a partner or to buy online.
7.1.8 Subscription lifecycle FAQ This section explains a subscription lifecycle and subscription operations that you can perform on your account management Web page. 7.1.8.1 How to access my account management Web page? To access this Web page from the Acronis Web site: 1. Select User Login. 2. Log in to your account (create one if you are not registered yet). 3. Navigate to Online backup > For Business. To access this Web page from Acronis Backup & Recovery 10: 1.
An expired subscription can be renewed within five days after expiration. In such cases, the new subscription will be activated immediately. Renewing a single subscription To renew a subscription 1. Go to the account management Web page. 2. Make sure that you have an available subscription with the same storage quota. 3. Select the machine that you want to renew the subscription for, and then click Renew. The subscription appears in the Next subscription column for the selected machine.
7.2 Where do I start? On the Acronis Web site, log in to your account (create one if you are not registered yet) and navigate to Online backup > For Business. This is your account management Web page. Here you can get a trial subscription, locate an Acronis partner or buy subscriptions online. The newly obtained subscriptions are listed as available subscriptions in the Manage Subscriptions tab.
the backup will fail. With a server subscription, you can only back up the Windows host. With a subscription for virtual machines, you can back up both the Windows host and its virtual machines. Trial subscriptions You can get one free workstation subscription, server subscription, or subscription for virtual machines per account. The storage quota of the trial subscription is equal to that of the standard subscription. The subscription period is limited to 2 months.
Reassigning a subscription does not restart its subscription period. To assign an activated subscription to a machine 1. On the machine to which you want to assign an activated subscription, go to the subscription activation window. 2. From Activated subscriptions, select the activated subscription that you want to reassign to the machine. 3. Click Activate now. Example The diagram below shows what happens if you reassign a subscription to a different machine.
After reassigning Delete backups from Subscription 1 using Machine 2. You cannot delete backups from Subscription 2, unless you assign this subscription to any machine. 7.5 Configuring proxy settings If the machine connects to the Internet through a proxy server, configure Acronis Backup & Recovery 10 to use the proxy server. 1. 2. 3. 4. Start Acronis Backup & Recovery 10. On the toolbar, on the Options menu, click Machine options. Click Online backup proxy. Enter the proxy server settings.
Dual destination (p. 67) By using the Backup performance > Network connection speed option, you can vary the transferring speed as kilobytes per second, but not as a percentage. Command-line mode Acronis Backup & Recovery 10 command-line utilities do not support online backup. 7.7 Terminology reference The following is the list of terms related to the Acronis Backup & Recovery 10 Online service. Activate a subscription Allow the machine to use the online storage according to the subscription.
Reassign a subscription Assign a subscription that is already activated, to a different machine. Registration code A character string for registering a subscription or license that was bought from an Acronis partner. When you purchase such subscriptions or licenses, you receive a confirmation e-mail containing the registration codes for each of them. You then enter the registration codes on the account management Web page, and these subscriptions and licenses become available for use.
8 Glossary A Acronis Active Restore The Acronis proprietary technology that brings a system online immediately after the system recovery is started. The system boots from the backup (p. 233) and the machine becomes operational and ready to provide necessary services. The data required to serve incoming requests is recovered with the highest priority; everything else is recovered in the background.
Limitation: requires re-activation of loaders other than Windows loaders and GRUB. Agent (Acronis Backup & Recovery 10 Agent) An application that performs data backup and recovery and enables other management operations on the machine (p. 236), such as task management and operations with hard disks. The type of data that can be backed up depends on the agent type.
Backup options Configuration parameters of a backup operation (p. 228), such as pre/post backup commands, maximum network bandwidth allotted for the backup stream or data compression level. Backup options are a part of a backup plan (p. 229). Backup plan (Plan) A set of rules that specify how the given data will be protected on a given machine. A backup plan specifies: what data to back up [optionally] the archive validation rules (p. 240) where to store the backup archive (p.
4. On each machine, the agent (p. 228) installed on the machine finds data items using the selection rules. For example, if the selection rule is [All volumes], the entire machine will be backed up. 5. On each machine, the agent installed on the machine creates a backup plan (p. 229) using other rules specified by the policy. Such backup plan is called a centralized plan (p. 231). 6. On each machine, the agent installed on the machine creates a set of centralized tasks (p. 231) that will carry out the plan.
Built-in groups cannot be deleted, moved to other groups or manually modified. Custom groups cannot be created within built-in groups. There is no way to remove a physical machine from the built-in group except for removing the machine from the management server. Virtual machines are removed as a result of their host server removal. A backup policy (p. 229) can be applied to a built-in group. C Centralized backup plan A backup plan (p. 229) that appears on the managed machine (p.
Cleanup Deleting backups (p. 228) from a backup archive (p. 228) in order to get rid of outdated backups or prevent the archive from exceeding the desired size. Cleanup consists in applying to an archive the retention rules set by the backup plan (p. 229) that produces the archive. This operation checks if the archive has exceeded its maximum size and/or for expired backups. This may or may not result in deleting backups depending on whether the retention rules are violated or not.
Direct management Any management operation that is performed on a managed machine (p. 236) using the direct console (p. 232)-agent (p. 228) connection (as opposed to centralized management (p. 231) when the operations are configured on the management server (p. 237) and propagated by the server to the managed machines). The direct management operations include: creating and managing local backup plans (p.
222189 Description of Disk Groups in Windows Disk Management http://support.microsoft.com/kb/222189/EN-US/ Dynamic disk A hard disk managed by Logical Disk Manager (LDM) that is available in Windows starting with Windows 2000. LDM helps flexibly allocate volumes on a storage device for better fault tolerance, better performance or larger volume size. A dynamic disk can use either the master boot record (MBR) or GUID partition table (GPT) partition style.
the administrator changes the criteria so that the machine does not meet them anymore. There is no way to remove a machine from a dynamic group manually except for deleting the machine from the management server. Dynamic volume Any volume located on dynamic disks (p. 234), or more precisely, on a disk group (p. 233). Dynamic volumes can span multiple disks.
F Full backup A self-sufficient backup (p. 228) containing all data chosen for backup. You do not need access to any other backup to recover the data from a full backup. G GFS (Grandfather-Father-Son) A popular backup scheme (p. 230) aimed to maintain the optimal balance between a backup archive (p. 228) size and the number of recovery points (p. 238) available from the archive.
Managed vault A centralized vault (p. 231) managed by a storage node (p. 238). Archives (p. 228) in a managed vault can be accessed as follows: bsp://node_address/vault_name/archive_name/ Physically, managed vaults can reside on a network share, SAN, NAS, on a hard drive local to the storage node or on a tape library locally attached to the storage node. The storage node performs storage node-side cleanup (p. 239) and storage node-side validation (p. 239) for each archive stored in the managed vault.
Plan See Backup plan (p. 229). Policy See Backup policy (p. 229). R Recovery point Date and time to which the backed up data can be reverted to. Registered machine A machine (p. 236) managed by a management server (p. 237). A machine can be registered on only one management server at a time. A machine becomes registered as a result of the registration (p. 238) procedure. Registration A procedure that adds a managed machine (p. 236) to a management server (p. 237).
prevent access to the backup archives, even in case the storage medium is stolen or accessed by a malefactor, by using encrypted vaults (p. 235). Storage node-side cleanup Cleanup (p. 231) performed by a storage node (p. 238) according to the backup plans (p. 229) that produce the archives (p. 228) stored in a managed vault (p. 236). Being an alternative to the agentside cleanup (p. 228), the cleanup on the storage node side relieves the production servers of unnecessary CPU load.
U Universal Restore (Acronis Backup & Recovery 10 Universal Restore) The Acronis proprietary technology that helps boot up Windows on dissimilar hardware or a virtual machine. The Universal Restore handles differences in devices that are critical for the operating system start-up, such as storage controllers, motherboard or chipset. The Universal Restore is not available: when the machine is booted with Acronis Startup Recovery Manager (p.
Virtual machine On Acronis Backup & Recovery 10 Management Server, a machine (p. 236) is considered virtual if it can be backed up from the virtualization host without installing an agent (p. 228) on the machine. A virtual machine appears on the management server after registration of the virtualization server that hosts the machine, provided that Acronis Backup & Recovery 10 agent for virtual machines is installed on that server.
