User`s guide

ManualsBrandsACRONIS ManualsSoftwareBackup & Recovery 10 Advanced Workstation, ES

100

command execution fails

Do not perform the data

capture until the command

execution is complete

Selected Selected

Cleared Cleared

Result

Preset

Perform the data

capture only after the

command is

successfully executed.

Fail the task if the

command execution

fails.

Perform the data

capture after the

command is

executed despite

execution failure

or success.

N/A Perform the data

capture concurrently

with the command

and irrespective of

the command

execution result.

Post-data capture command

To specify a command/batch file to be executed after data capture

1. In the Command field, type a command or browse to a batch file. The program does not support

interactive commands, i.e. commands that require user input (for example, "pause".)

2. In the Working directory field, specify a path to a directory where the command/batch file will

be executed.

3. In the Arguments field specify the command’s execution arguments, if required.

4. Depending on the result you want to obtain, select the appropriate options as described in the

table below.

5. Click Test command to check if the command is correct.

Check box Selection

Fail the task if the command

execution fails

Selected Cleared

Do not back up until the

command execution is

complete

Selected Selected

Cleared Cleared

Result

Preset

Continue the backup

only after the

command is

successfully

executed. Delete the

TIB file and

temporary files and

fail the task if the

command execution

fails.

Continue the

backup after the

command is

executed despite

command

execution failure

or success.

N/A Continue the

backup concurrently

with the command

execution and

irrespective of the

command execution

result.

3.4.1.5 File-level backup snapshot

This option is effective only for file-level backup in Windows and Linux operating systems.