User`s guide

63 Copyright © Acronis, Inc., 2000-2010
The policy gets the Warning status on Windows machines that have either a D: or F: volume, unless
an event that will result in an error occurs.
The policy that has to back up the [System] and the /dev/sda1 volumes, will get the Warning status
on the Windows machines (since /dev/sda is not found) and on the Linux machines that have the
/dev/sda1 volume (since the [System] volume is not found). The policy will get the Error status on
Linux machines that do not have a SCSI device.
The following table provides details.
State Status Description
Deploying Error The deployment log has errors, for example, disk space runs out
Warning The deployment log has warnings: the machine went offline during the
deployment; cannot connect for N days…
OK The deployment log does not have errors and warnings
Deployed Error The status of the corresponding backup plan is Error
Warning The status of the corresponding backup plan is Warning
OK The status of the corresponding backup plan is OK
Updating Error The updating log has errors: cannot delete the locked task, the Acronis
service is stopped…
Warning The updating log has warnings
OK The updating log does not have errors and warnings
Revoking Error The revoking log has errors
Warning The revoking log has warnings
OK The revoking log does not have errors and warnings
In addition to the deployment state and status as related to a specific machine, the backup policy has
the deployment state and status on a group of machines and the cumulative deployment state and
status of the policy.
2.12.5.3 Policy deployment state on a group
To see this parameter, select Machines in the tree, then select the group, and then select the Backup
policies tab on the Information pane.
This state is defined as a combination of deployment states of the policy on the machines included in
the group and its child groups.
For example, you applied the policy to the group consisting of machines A and B. While the
deployment takes place on both machines, the policy's state on the group will be "Deploying". If the
deployment completes on one of the machines while it continues on the other, the state will be
"Deploying, Deployed". When the deployment completes on both machines, the state will be
"Deployed".
2.12.5.4 Policy status on a group
To see this parameter, select Machines in the tree, then select the group, and then select the Backup
policies tab on the Information pane.