User`s guide

ManualsBrandsACRONIS ManualsSoftwareBackup & Recovery 10 Advanced Workstation, EN

231

232

233

234

235

236

237

238

239

240

root (hd0,0)

10. Install GRUB. For example, to install GRUB in the master boot record (MBR) of the first disk, run

the following command:

setup (hd0)

11. Exit the GRUB shell:

quit

12. Unmount the mounted file systems and then reboot:

umount /mnt/system/dev/

umount /mnt/system/proc/

umount /mnt/system/boot/

umount /mnt/system/

reboot

13. Reconfigure the bootloader by using tools and documentation from the Linux distribution that

you use. For example, in Debian and Ubuntu, you may need to edit some commented lines in the

/boot/grub/menu.lst file and then run the update-grub script; otherwise, the changes might not

take effect.

6.3.11.2 About Windows loaders

Windows NT/2000/XP/2003

A part of the loader resides in the partition boot sector, the rest is in the files ntldr, boot.ini,

ntdetect.com, ntbootdd.sys. boot.ini is a text file that contains the loader configuration. Example:

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional"

/noexecute=optin /fastdetect

Windows Vista/2008

A part of the loader resides in the partition boot sector, the rest is in the files bootmgr, boot\bcd. At

starting Windows, boot\bcd is mounted to the registry key HKLM \BCD00000000.

6.3.12 Recovering the storage node

In addition to backing up data to centralized vaults managed by Acronis Backup & Recovery 10

Storage Node, you may want to perform a disk backup of the machine where the storage node itself

is installed.

This section describes how to recover the storage node registered on the management server in case

the storage node and the management server are installed on different machines (if they are

installed on the same machine, simply recover that machine).

Consider the following scenario:

 You have a machine with the management server and a machine with the storage node.

 The storage node is registered on the management server.

 You backed up the machine with the storage node earlier, and have just recovered it—either on

the same machine or on a different machine.