User guide

The path to the database whose mailboxes are to be displayed. The parameter is used with the list

exchange_mailboxes (p. 32) command.

For detailed information about the value format, see "Specifying Exchange data" (p. 76).

If the parameter is not specified, the software will display all the mailboxes on an Exchange server.

3.5 Disks and volumes

3.5.1 disk

Commands: backup disk and backup vm

--disk=<disk numbers>

The parameter is used with the backup disk (p. 19) and backup vm (p. 28) commands to specify

disks to be backed up.

Use the list disks (p. 18) command to obtain numbers of available disks and volumes.

You can use the --disk and --volume (p. 84) parameters within one command line, for example:

--disk=1 --volume=E

If neither the --disk parameter nor the --volume parameter is specified, the software will back up

all of the machine's disks.

Commands: recover disk, recover mbr, recover vm, create asz

--disk=<disk number>

Command with which

the parameter is used

What does the parameter mean?

What if the parameter is not specified?

recover disk (p. 20)

recover vm (p. 29)

The number of the disk whose data

is to be recovered from a backup.

With the recover disk command,

you can specify several disks.

If the --volume (p. 84) parameter is

specified, this volume will be recovered.

Otherwise, the command will recover all of

the backed-up disks.

recover mbr (p. 22)

The number of the disk whose MBR

is to be recovered from a backup

The command will fail.

create asz (p. 55)

The number of the disk on which

Acronis Secure Zone is to be created

The command will fail.

3.5.2 nt_signature

--nt_signature={auto|new|backup|existing}

The NT signature is a record that is kept in the hard disk's MBR. It uniquely identifies the hard disk for

the operating system.

When recovering a disk (p. 20) containing a system volume, you can choose what to do with the NT

signature of the target disk. Specify any of the following parameters:

 auto (default)