User guide

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

--progress (p. 119)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams|asn} (p. 72)

In a managed vault (--loc=bsp://<storage node>/<vault name>), the operation is always

executed by the storage node service. If you specify a different service, it will transmit the

command to asn.

2.9 Operations with disks

2.9.1 clone disk

Clones a hard disk. Use this operation if you need to transfer all the source disk data to a target disk.

The software does not resize the volumes of the source disk. Therefore, the target disk should have a

greater capacity than the source disk. Otherwise, the command will fail.

Examples (p. 137)

Parameters

--source=<source disk number>

The number of the source disk.

--target=<target disk number>

The number of the target disk.

--reboot (p. 120)

--reboot_after (p. 120)

General parameters