User guide

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams|asn} (p. 72)

2.7.3 inventory tape

Detects tapes loaded into a tape device and assigns names to those that have none. Run this

command every time you load tapes into the tape device slots.

Examples (p. 135)

Parameters

--mode={full|fast} (p. 114)

--libraries=<GUIDs> (p. 114)

--slots=<GUIDs> (p. 115)

--assign2free (p. 114)

General parameters

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams|asn} (p. 72)

2.8 Operations with vaults

2.8.1 validate vault

Validates data integrity of all archives in the specified location except for password-protected ones.

To validate a password-protected archive, use the validate archive (p. 42) command.

Examples (p. 136)