User guide

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP addresses or hostnames> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams} (p. 72)

2.7 Operations with tapes

2.7.1 list tape_libraries

Lists tape libraries and/or stand-alone tape drives attached to a machine where an Acronis Backup &

Recovery 11.5 agent or Acronis Backup & Recovery 11.5 Storage Node is running.

Examples (p. 135)

Parameters

--filter_guid=<GUIDs> (p. 112)

--filter_name=<names> (p. 112)

General parameters

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams|asn} (p. 72)

2.7.2 list tape_slots

Lists slots of the tape libraries attached to a machine where an Acronis Backup & Recovery 11.5

agent or Acronis Backup & Recovery 11.5 Storage Node is running. The following information will be

displayed for each slot: name; GUID; type (mail for mail slots, drive for drives, storage for other

slots); barcode and label of the tape that occupies the slot (if any); GUID of the tape library.

Examples (p. 135)

Parameters

--filter_library=<GUID> (p. 112)

General parameters