User guide

--progress (p. 119)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams|asn} (p. 72)

In a managed vault (--loc=bsp://<storage node>/<vault name>), the operation is always

executed by the storage node service. If you specify a different service, it will transmit the

command to asn.

2.4.3 Mounting volumes

Mounting volumes from a disk-level backup lets you access the volumes as though they were

physical disks.

2.4.3.1 list mounts

Lists the volumes mounted from backups.

Examples (p. 133)

Parameters

General parameters

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams} (p. 72)

2.4.3.2 mount

Mounts the specified volumes from the backup to the system where Agent for Windows or Agent for

Linux is installed.

Limitation: You can only mount backups stored in a local or shared folder or in Acronis Secure Zone.

Examples (p. 133)