User guide

--progress (p. 119)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP address or hostname> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams|asn} (p. 72)

In a managed vault (--loc=bsp://<storage node>/<vault name>), the operation is always

executed by the storage node service. If you specify a different service, it will transmit the

command to asn.

2.4.2.5 export backup

Copies the archive specified by the --arc parameter from the location specified by the --loc

parameter to the location specified by the --target parameter. The copy will contain only the

backups specified by the --backup parameter.

To export an entire archive or all the archives stored in a location, use the export archive (p. 41) command.

The command always creates a new archive in the target location. You cannot specify an existing

archive in the --target_arc parameter. Both the --target and the --target_arc parameters

are mandatory.

If the --backup parameter is not specified, the command will export only the latest backup.

Examples (p. 131)

Parameters

--loc=<path> (p. 78)

--credentials=<user name>,<password>,encrypted (p. 115)

--arc=<archive name> (p. 79)

--password=<password>,encrypted (p. 119)

--backup=<backup IDs> (p. 80)

--target=<path> (p. 80)

--credentials=<user name>,<password>,encrypted (p. 115)

--target_arc=<archive name> (p. 82)

--cataloging={full|fast} (p. 92)

General parameters

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

--progress (p. 119)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)