User guide

2.3.3 Virtual machines

The commands listed in this section are available in the Acronis Backup & Recovery 11.5 Virtual

Edition only if Agent for ESX(i) or Agent for Hyper-V is installed. (This does not apply to the recover

vm (p. 29) command.)

2.3.3.1 list vmservers

Lists virtualization servers and server clusters that are present on the specified management server

or that are accessible to Agent for ESX(i).

Examples (p. 125)

Parameters

--filter_guid=<GUIDs> (p. 112)

--filter_name=<names> (p. 112)

--filter_machines=<quantities of machines> (p. 112)

--filter_type=<server types> (p. 113)

General parameters

--log=<full path> (p. 117)

--log_format={structured|unstructured} (p. 117)

--output={formatted|raw} (p. 118)

{-f|--file_params}=<full local path> (p. 116)

Access to a remote machine (advanced editions only)

--host=<IP address or hostname> (p. 72)

--credentials=<user name>,<password>,encrypted (p. 115)

--address=<IP addresses or hostnames> (p. 72)

Access to a specific service within a machine (advanced editions only)

--service={mms|ams} (p. 72)

2.3.3.2 list vms

Lists virtual machines that are present on the specified management server or that are managed by

Agent for ESX(i) or Agent for Hyper-V, depending on the service that will execute the command.

Examples (p. 125)

Parameters

--filter_available_for_backup={true|false} (p. 111)

--filter_guid=<GUIDs> (p. 112)

--filter_host=<hostnames> (p. 112)

--filter_name=<names> (p. 112)

--filter_state=<states> (p. 113)

--filter_status=<statuses> (p. 113)

General parameters