User guide

If the parameter is not specified, the command allows interaction with the user.

The parameter is mainly intended for the recover lvm_structure (p. 23) command. It automates

the recovery of a Linux system, along with its software RAID/LVM structure, to a machine with

different logical volume structure or without logical volumes. This command always prompts the user

to confirm the replacement of the machine's logical volume structure.

Please be aware that by using the --force_yes parameter you may unintentionally confirm

deletion of useful data. If you want the software to simply ignore interaction requests, use the

--silent_mode (p. 120) parameter rather than the --force_yes parameter. These parameters

are mutually exclusive.

3.12.5 id

--id=<GUID>

GUID of the activity, task or backup plan with which the operation is to be performed. The parameter

is used with the get log (p. 63) command and with the task (p. 68) and plan (p. 65) management

commands.

3.12.6 log

--log=<full path>

Saves the log of the operation with which the parameter is used to the specified file. The format of

the log file depends on the --log_format (p. 117) parameter value.

3.12.7 log_format

--log_format={structured|unstructured}

The format of the log file specified in the --log (p. 117) parameter. If the value is structured or if

the parameter is not specified, the software will write logs in the structured xml format. The format

is described in the acrocmd.xsd file located in the folder where the command-line utility is installed.

The default installation paths of the utility are listed in the "Installation" (p. 7) section under

"Installation paths".

If the value is unstructured, the software will write logs in the Acronis xml format.

3.12.8 network_speed

--network_speed=<speed>{kb|p}

The speed of transferring the data through the network during a backup or validation command

execution.

In the backup commands, this parameter is used if the backup destination (the --loc (p. 78)

parameter value) is a location on the network, i.e., a network share, a managed vault, an FTP/SFTP

server, or Acronis Online Backup Storage. For other location types, this parameter is ignored.

In the validation commands, this parameter is used with the same backup destinations, except for a

managed vault.