2011

This is recommended in order to prevent viruses and other malware from infecting
your computer.
Detected devices fall into one of these categories:
● CDs/DVDs
● USB storage devices, such as flash pens and external hard-drives
● mapped (remote) network drives
When such a device is detected, an alert window is displayed.
To scan the storage device, just click Yes. The Antivirus Scan wizard will appear
and guide you through the scanning process.
If you do not want to scan the device, you must click No. In this case, you may find
one of these options useful:
● Don't ask me again about this type of device - Acronis Internet Security will
no longer offer to scan storage devices of this type when they are connected to
your computer.
● Disable automatic device detection - You will no longer be prompted to scan
new storage devices when they are connected to the computer.
If you accidentally disabled automatic device detection and you want to enable it,
or if you want to configure its settings, follow these steps:
1. Open Acronis Internet Security, click Options in the upper-right corner of the
window and choose Expert View.
2. Go to Antivirus>Virus Scan.
3. In the list of scan tasks, locate the Device Scanning task.
4. Right-click the task and select Properties. A new window will appear.
5. On the Overview tab, configure the scanning options as needed. For more
information, please refer to “Configuring Scan Settings” (p. 52).
6. On the Detection tab, choose which types of storage devices to be detected.
7. Click OK to save and apply the changes.
Overview
5