Installation guide

Specifies the password for the user whose name is given by <User name>.

-p <Port number> or --port=<Port number>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies the number of the TCP port to use to connect to other Acronis Backup & Recovery 11.5

components. The default port number is 9876.

--aur

Applies only to the installation files of Acronis Backup & Recovery 11.5 Agent for Linux and

Acronis Backup & Recovery 11.5 Bootable Components and Media Builder.

Enables the Universal Restore feature. You need to specify a license key for this feature, by using

the -l or -L parameter (see later in this section).

Note: This feature is already enabled in Acronis Backup & Recovery 11.5 Virtual Edition.

--dedup

Applies only to the installation files of Acronis Backup & Recovery 11.5 Agent for Linux and

Acronis Backup & Recovery 11.5 Bootable Components and Media Builder.

Enables the Deduplication feature. You need to specify a license key for this feature, by using the

-l or the -L parameter (see later in this section).

Note: This feature is already enabled in the trial mode of Acronis Backup & Recovery 11.5.

-l <License key> or --serial=<License key>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies the license key for the component. Use either this parameter or the -L parameter.

If you are enabling the Deduplication and/or the Universal Restore feature (see the --aur and

--dedup parameters described previously), also specify the corresponding license keys,

separating them by commas; for example:

-l 11111-AAAAA,22222-DDDDD,33333-UUUUU

-L <License server> or --license-server=<License server>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies the name or IP address of the Acronis License Server. Use either this parameter or the

-l parameter.

When using this parameter, you need to specify the code of your edition of Acronis Backup &

Recovery 11.5, by using the -P parameter.

-P <Product alias>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies the code of your edition of Acronis Backup & Recovery 11.5—also called the product

alias. The codes are the following:

Acronis Backup & Recovery 11.5 Advanced Server: ABR11.5_AS

Acronis Backup & Recovery 11.5 Advanced Server for Linux: ABR11.5_ASL

Acronis Backup & Recovery 11.5 Virtual Edition family: ABR11.5_VE, ABR11.5_VEESX,

ABR11.5_VEHV, ABR11.5_VERHEV, ABR11.5_VEXEN, or ABR11.5_VEPRL

-v or --version

Displays the product version and then exits.

-? or --help