Installation guide

-s or --disable-native-shared

Forces using the setup program’s own redistributable libraries during installation, instead of

those present in the system.

Redistributable libraries are standard sets of internal tools. Programs use these libraries for

purposes such as displaying the user interface.

The setup program contains copies of all the libraries it needs. By default, it uses a copy of a

library only when no such library is present in the system. With this parameter, the setup

program always uses the copy.

You may want to use this parameter when experiencing problems with installation; for example,

when the user interface of the setup program is not displayed correctly.

-d or --debug

Puts verbose information to the installation log.

-i <Component name> or --id=<Component name>

You do not have to specify this parameter in advanced editions. It is present for uniformity with

the command-line parameters of the installation file of Acronis Backup & Recovery 11.5 Server for

Linux.

Specifies the name of the component being installed:

For Acronis Backup & Recovery 11.5 Agent for Linux: BackupAndRecoveryAgent

For Acronis Backup & Recovery 11.5 Bootable Components and Media Builder:

BackupAndRecoveryBootableComponents

For Acronis Backup & Recovery 11.5 Management Console: ManagementConsole

The names are case-sensitive.

-e {0|1} or --ssl={0|1}

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies whether to enable authentication for connection to other components. Authentication

is performed by using Secure Socket Layer (SSL) certificates.

The possible values are:

0: Do not use authentication

1: Use authentication

-C <Management server> or --ams=<Management server>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies the name or IP address of the Acronis Backup & Recovery 11.5 Management Server.

When using this parameter, you need to specify the user name and password of a management

server administrator by using the -g and -w parameters, respectively.

The machine will be registered on the management server after the installation is complete.

-g <User name> or --login=<User name>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.

Specifies the user name of a member of the Acronis Centralized Admins group on the

management server whose name is given by <Management server>.

-w <Password> or --password=<Password>

Applies only to the installation file of Acronis Backup & Recovery 11.5 Agent for Linux.