User`s guide

Then, with the /preserve_mbr option, the restored partition’s entry
will occupy the upper empty position in the target disk MBR. Thus,
the target disk MBR is preserved. If not specified, the restored
partition’s entry will occupy the same position as in the source disk
MBR saved in the image. If the position is not empty, the existing
entry will be moved to another position.
The following options are available when using the SonicWALL Universal Restore. For more
information see
3.3 SonicWALL Universal Restore .
/ur_path:[path]
/ur_username:[user]
/ur_password:[pwd]
Specifies using SonicWALL Universal Restore and the path to the
drivers storage.
/ur_driver:[inf-filename]
Specifies using SonicWALL Universal Restore and the mass-storage
driver to be installed.
List
/filename:[file_name]
With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide
with those in the drives/partitions list, if the image does not contain
all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the
deploy /partition command cannot find a partition in the
image by its physical number, use
/
partition:<number in the
image> /target
_
partition:<physical number of the target
partition>
keys. For the above example, to restore partition 2-5
to its original place use:
/partition:2-2 /target partition:2-5.
13.1.4 baremetalrecoverycmd.exe usage examples
1. Image disks and partitions
baremetalrecoverycmd /create /filename:"C:\Test\1.tib"
/partition:2-1,1-3
• This will create an image named 1.tib of the partitions 2-1 and 1-3. The image will be
saved to the C:\Test\ folder.
baremetalrecoverycmd /create /filename:"\Test\1.tib"
/partition:2-1,1-3 /file_partition:3-1
• This will create an image named 1.tib of the partitions 2-1 and 1-3. The image will be
saved in the folder \Test on partition 3-1.
baremetalrecoverycmd /create /filename:"C:\Test\1.tib"
/password:qwerty /harddisk:2 /reboot /raw /incremental
/compression:5 /split:640 /progress:off
• This will append an incremental image to the image named 1.tib of hard disk 2. The
image will be saved to C:\Test\ folder, protected with password “qwerty”, split into
parts of 640MB, and contain all cluster data. Image compression level is 5. The server
will be rebooted after the operation is completed.
baremetalrecoverycmd /create /partition:2-1
/filename:\\server1\folder\arc.tib /net_user:user1
/net_password:pw1 /log:\\server2\dir\log1.log
/log_net_user:user2 /log_net_password:pw2
Copyright © SonicWALL, Inc., 2000-2008 87