User`s guide

An additional choice is available - recording All events, Warnings and Errors, or

Errors only.

10.4.2 SNMP notifications

SonicWALL Bare Metal Recovery can provide the following Simple Network Management

Protocol (SNMP) objects to SNMP management applications:

1.3.6.1.4.1.24769.100.200.1.0 - string identifying a type of occurred event (Information,

Warning, Error)

1.3.6.1.4.1.24769.100.200.2.0 - string containing text description of occurred event (it

looks identically to messages published by SonicWALL Bare Metal Recovery in its log).

Sending SNMP messages is disabled by default. To set up sending messages, select Send

messages to SNMP server and specify:

• types of events to be reported: All events, Warnings and Errors, or Errors only

• Please note: Depending on the reasons of the operation failure, sometimes the

SNMP notification about this failure might not be sent to you, please, make sure to

check the operation log.

• name or IP address of the host running the SNMP management application, to which

notifications will be sent

• name of SNMP community to which both the host running SNMP management

application and the computers executing the task belong.