User`s guide

Corporate administrators need an option to continue a back up despite any errors that

might occur without the system popping up an error box. Details of the operation,

including errors, if any, could be found in the operation log.

With the silent mode enabled, the program will not display interactive windows. Instead,

it will automatically handle situations requiring user intervention such as running out disk

space (except for handling bad sectors, which is defined as a separate option.) No

prompts will be displayed, including those for removable media. If an operation cannot

continue without user action, it will fail.

Therefore, enable this feature if you do not want unattended backup operations hang on

pop-ups and errors.

3. If an error occurs, re-attempt in (minutes)

The preset is enabled.

When the backup destination location on the network is not available or not reachable,

the program will attempt to reach the location at the specified time interval.

5.2.9 Additional settings

1. Validate backup archive upon operation completion

The preset is disabled.

The program will check integrity of the just created or supplemented archive immediately

after backup when enabled.

To check archive data integrity, you must have all incremental backups belonging to the

archive and the initial full backup. If any of successive backups is missing, validation is

not possible.

2. Ask for first media while creating backup archives on removable media

The preset is enabled.