Operation Manual

393 Copyright © Acronis International GmbH, 2002-2015
 Community – type the name of the SNMP community to which both the host running SNMP
management application and the sending machine belong. The typical community is "public".
Click Send test message to check if the settings are correct.
To disable sending SNMP messages, clear the Send messages to SNMP server check box.
The messages are sent over UDP.
Windows event log
This option defines whether the management server has to record its own log events in the
Application Event Log of Windows (to see this log, run eventvwr.exe or select Control Panel >
Administrative tools > Event Viewer). You can filter the events to be recorded.
The preset is: Disabled.
To enable this option, select the Log events check box.
Use the Types of events to log check box to filter the events to be logged in the Application
Event Log of Windows:
 All events - all events (information, warnings and errors)
 Errors and warnings
 Errors only.
To disable this option, clear the Log events check box.
15.4.10.6 Logging level
This option defines whether the management server has to collect log events from the registered
machines to the centralized log that is stored in a dedicated database and is available in the Log view.
You can set the option for all the events at once or select the event types to be collected. If you
completely disable collection of the log events, the centralized log will contain only the management
server's own log.
The preset is: Collect logs for All events.
Use the Types of events to log combo-box to specify the types of events that will be collected:
 All events - all events (information, warnings and errors) occurred on all the machines registered
on the management server will be recorded to the centralized log
 Errors and warnings - warnings and errors will be recorded to the centralized log
 Errors only - only errors will be recorded to the centralized log.
To disable collection of the log events, clear the Collect logs check box.
Log cleanup rules
This option specifies how to clean up the centralized event log stored in the management server's
reporting database.
This option defines the maximum size of the reporting database.
The preset is: Maximum log size: 1 GB. On cleanup, keep 95% of the maximum log size.
When the option is enabled, the program compares the actual log size with the maximum size after
every 100 log entries. Once the maximum log size is exceeded, the program deletes the oldest log