Operation Manual

397 Copyright © Acronis International GmbH, 2002-2015
Alert notifications
This option enables you to specify when to send e-mail notifications about alerts which occurred on
the management server and to select the types of alerts to send.
When using this option, make sure that the e-mail settings are properly configured in Management
server options > E-mail settings (p. 396).
The preset is: Disabled.
To configure alert notifications
1. Select when to send alert notifications:
 As soon as an alert appears – to send a notification every time a new alert occurs.
Click Select the types of alerts... to specify the types of alerts to send notifications about.
 On schedule send notification about all current alerts – to send a cumulative alert
notification including all alerts which occurred over a time interval you specify.
Click Select the types of alerts... to specify the types of alerts to send notifications about.
Set up the notification Frequency and Time.
2. Click OK.
15.4.10.5 Event tracing
You can configure the management server to log events in the Application Event Log of Windows,
besides the management server's own log.
You can configure the management server to send Simple Network Management Protocol (SNMP)
objects to a specified SNMP manager.
SNMP notifications
This option defines whether the management server has to send its own log events to the specified
Simple Network Management Protocol (SNMP) managers. You can choose the types of events to be
sent.
For detailed information about using SNMP with Acronis Backup, please see "Support for SNMP (p.
53)".
The preset is: Disabled.
To set up sending SNMP messages
1. Select the Send messages to SNMP server check box.
2. Specify the appropriate options as follows:
 Types of events to send – choose the types of events: All events, Errors and warnings, or
Errors only.
 Server name/IP – type the name or IP address of the host running the SNMP management
application, the messages will be sent to.
 Community – type the name of the SNMP community to which both the host running SNMP
management application and the sending machine belong. The typical community is "public".
Click Send test message to check if the settings are correct.
To disable sending SNMP messages, clear the Send messages to SNMP server check box.
The messages are sent over UDP.