Operation Manual

262 Copyright © Acronis International GmbH, 2002-2015
 Windows Vista (PE 2.0)
 Windows Vista SP1 and Windows Server 2008 (PE 2.1)
 Windows 7 (PE 3.0) with or without the supplement for Windows 7 SP1 (PE 3.1)
 Windows 8 (PE 4.0)
 Windows 8.1 (PE 5.0)
Bootable Media Builder supports both 32-bit and 64-bit WinPE distributions. The 32-bit WinPE
distributions can also work on 64-bit hardware. However, you need a 64-bit distribution to boot a
machine that uses Unified Extensible Firmware Interface (UEFI).
PE images based on WinPE 4 and later require approximately 1 GB of RAM to work.
9.1.2.1 Preparation: WinPE 2.x and 3.x
To be able to create or modify PE 2.x or 3.x images, install Bootable Media Builder on a machine
where Windows Automated Installation Kit (AIK) is installed. If you do not have a machine with AIK,
prepare it as follows.
To prepare a machine with AIK
1. Download and install Windows Automated Installation Kit.
Automated Installation Kit (AIK) for Windows Vista (PE 2.0):
http://www.microsoft.com/Downloads/details.aspx?familyid=C7D4BC6D-15F3-4284-9123-67983
0D629F2&displaylang=en
Automated Installation Kit (AIK) for Windows Vista SP1 and Windows Server 2008 (PE 2.1):
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c
657de08&DisplayLang=en
Automated Installation Kit (AIK) for Windows 7 (PE 3.0):
http://www.microsoft.com/downloads/details.aspx?familyid=696DD665-9F76-4177-A811-39C26
D3B3B34&displaylang=en
Automated Installation Kit (AIK) Supplement for Windows 7 SP1 (PE 3.1):
http://www.microsoft.com/download/en/details.aspx?id=5188
You can find system requirements for installation by following the above links.
2. [Optional] Burn the WAIK to DVD or copy to a flash drive.
3. Install the Microsoft .NET Framework from this kit (NETFXx86 or NETFXx64, depending on your
hardware).
4. Install Microsoft Core XML (MSXML) 5.0 or 6.0 Parser from this kit.
5. Install Windows AIK from this kit.
6. Install Bootable Media Builder on the same machine.
It is recommended that you familiarize yourself with the help documentation supplied with Windows
AIK. To access the documentation, select Microsoft Windows AIK -> Documentation from the start
menu.
9.1.2.2 Preparation: WinPE 4.0 and WinPE 5.0
To be able to create or modify PE 4 or 5 images, install Bootable Media Builder on a machine where
Windows Assessment and Deployment Kit (ADK) is installed. If you do not have a machine with ADK,
prepare it as follows.