Installation Instructions

6. Review the components which will be installed and press Install.

7. Review the installed components and close the installer.

8. You will be prompted to open the Configuration Utility, press OK.

Verify that none of the settings in the Configuration Utility have changed. After you have verified all

of your settings are as expected, press OK to close the Configuration Utility and start the Acronis

Access services.

3.4.2.2 Upgrading an activEcho server with a mobilEcho Client

Management Server

Scenario 2 - Upgrading an activEcho server with a mobilEcho Client Management Server

In this scenario, you have one Windows Server running the activEcho Server and the mobilEcho File

Server and Management Server. This procedure will upgrade your activEcho server and mobilEcho

Client Management Server to the unified Acronis Access Server web console. The new console also

replaces the mobilEcho Administrator Windows program previously used to administer mobilEcho

servers. The Acronis Access Server web console allows you to administer both activEcho and

mobilEcho from one unified web interface.

To perform an upgrade of activEcho:

1. Backup all of the necessary files following these guides: mobilEcho 4.5 Backup and/or activEcho

2.7 backup.

2. You should first upgrade to Acronis Access 6.0 and then upgrade to Acronis Access 7.X. To

download Acronis Access 6.0, use this link:

http://www.grouplogic.com/files/glidownload/verify.asp?version=AA60

3. Disable any anti-virus software you have or it may interrupt the installation procedure resulting

in a failed installation.

4. Download the Acronis Access Server installer to your activEcho server and run the installer.

a. To access the latest installer, please visit: http://support.grouplogic.com/?page_id=3598

b. You will need to enter your product serial number for verification before downloading the

installer.