User`s manual

I/O SERVER User’s Manual Industrial PC
___________________________________________________________________
________________________________________________________________________
Acromag, Inc. Tel:[phone] Fax:[phone] Email:[e-mail] http://www.acromag.com
41
IOS Slot Fuses (Replacement part number):
+5 Volts………………………….. 4 Amps (Littlefuse/R429004)
+12 Volts………………………… 3 Amps (Littlefuse/R429003)
-12 Volts…………………………. 3 Amps (Littlefuse/R429003)
Note: These fuses are rated higher than needed to handle the in-rush
currents and avoid nuisance fuse replacements.
Form Factor: Type I/II CompactFlash
®
50 pin Card. Socket has left side
ejector.
IOS-7400-WIN: This models ships with an 8GB Industrial SLC
CompactFlash
®
.
Temp: -40°C to 85°C
MTBF: > 4,000,000 hours
Power Requirements: 9-32V DC, 25W Typical, 60W Maximum. Keep DC
power cables less than 10m in length. Divide power by your voltage to
calculate max current. Then select a supply that can deliver an inrush
current of at least twice this amount.
Power Requirements
IOS-7400 TYP
1
MAX
2
Processor + 1G DDR 11.5W 25W
Other Controls I/O 2.12W 6W
CompactFlash
®
Slot 0.63W 1.5W
Optional Hard Drive 1.5W
IOS Modules 20W
1. Typical Operating conditions at 25°C running test program that
exercises all I/O ports.
Form Factor: 2.5” Hard Drive
Bus: Parallel EIDE. Not compatible with SATA.
Current: 300mA Maximum
Compliance: ATA-6.
CompactFlash
®
Powe
r
Table 7.1: Power
Requirements.
Optional 2.5” Drive