User`s manual

I/O SERVER User’s Manual Industrial PC
___________________________________________________________________
________________________________________________________________________
Acromag, Inc. Tel:[phone] Fax:[phone] Email:[e-mail] http://www.acromag.com
27
If any errors are made when entering settings in the system BIOS, the
system may become unstable or inoperable. Should this occur follow the
following procedure to restore the default BIOS settings. Note that this
procedure only requires that a keyboard is attached to the IOS-7400. No
monitor, bootable drive, or mouse is required.
Bios Recovery Procedure
1. Reset the system by cycling the DC power input.
2. Immediately after turning on power, hit the DEL key for about 15
seconds to enter Setup.
3. Press the Right Arrow key.
4. Press the Down Arrow key.
5. Press the Down Arrow key.
6. Press ENTER.
7. Press the Y key.
8. Press ENTER.
9. Press F10.
10. Press the Y key.
11. Press ENTER.
BIOS Recovery Procedure