User`s manual

I/O SERVER User’s Manual Industrial PC
___________________________________________________________________
________________________________________________________________________
Acromag, Inc. Tel:[phone] Fax:[phone] Email:[e-mail] http://www.acromag.com
23
The SuperIO Device page allows changes to the COM ports.
• Onboard Serial Port 1/2
This item allows the user to adjust COM port 1 & 2 address and IRQ.
Note that these changes only affect the two external COM ports
located on the IOS-7400. IOS modules that support serial connections
will not be changed.
• UART Mode Select [Normal]
This item allows the user to adjust serial port UART mode. Currently
the IOS-7400 only supports Normal mode.
• RxD/TxD /IR/ UR2 / Parallel/ EPP/ ECP
These settings are not supported by the IOS-7400.
• PWRON After PWR-Fail [Off]
This option is not supported by the IOS-7400.
SuperIO Device