Instructions / Assembly

OPEN-EDGE GUARDRAIL #12075
• Nail plate with guardrail holder
• Provides fall protection, slide-guard and toeboard
• Installs and removes like a roof bracket
• Interleaves with shingles
• Use on rake-edges of any pitch & eaves under 4/12
• Slotted nail-holes for 16” or 24” rafter spacing
• Tested in a lab to meet OSHA’s 2011 regulations
• Meets OSHA’s 200lbs requirement both out & down
• Maximum spacing 8’ apart (used with construction grade
lumber)
• Can be used in all phases of construction
• Powder coated safety yellow
• Made in America
Use Acro’s exclusive 12075 Open-edge Guardrail Brackets on
rake-edges of any pitch and eave-edges under 4/12 pitch; in
conjunction with Acro’s proven 12070 Steep-pitch Guardrail
Brackets along the eave-edges from 4/12 to 16/12 to form the
backbone of a complete residential guardrail system. Two sets
of 2 x 4's are used with a toe board to form a continuous guard-
rail around the entire roof edge. This innovative full guardrail
system is easy to install, move & remove without damaging
shingles on any roof 16/12 pitch and under. This allows the
guardrails to be put up early in the new construction process or
even prior to shingle removal on a tear off; and easily moved
without having to take the system down. Acro now offers a
way to comply fully with OSHA’s 2011 requirements without
the need of any other impeding safety equipment, Use your
regular ACRO Building Systems Roof Brackets on the balance
of the roof for shingle installation.
Please visit our website for install instructions, product vid-
eos and the benefits of passive fall protection systems.
12075 OPEN-EDGE GUARDRAIL
12075 Open-Edge Guardrail
Model # Description
Lbs. Dimensions
12075 Complete System (w/ post) 11 43”x25”x12”
12055 Replacement Post 4 42”x5”x1”
PHONE (TOLL FREE): 800-267-3807
FAX: [phone]
WEB: WWW.ACROBUILDINGSYSTEMS.COM
EMAIL: [e-mail]