Safety Data Sheets (SDS)

ACRE
Change of state
Flash point Not applicable
Other remarks
Density 0.60 g/cm3
SECTION 10: STABILITY AND REACTIVITY
10.1 Thermal decomposition Above approx. 200
10.2
Hazardous decomposition
products
In addition to hydrochloric acid, carbon dioxide and water will develop during the burning process. In
the case of incomplete burning, carbon monoxide and traces of phosgene may also be present.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1 No hazardous effects on health were observed over several years of usage
SECTION 12: ECOLOGICAL INFORMATION
12.1 No biodegradation, no solubility in water, no hazardous effects on the environment are to be expected
12.2 Mobility Dust from processing is very mobile
SECTION 13: DISPOSAL CONSIDERATIONS
13.1 Preferably to be recycled. Possible disposal with household waste (in accordance with local regulations)
13.2 Waste key for unused product EAK-Code 120 105
13.3 Waste name Plastic waste
SECTION 14: TRANSPORT INFORMATION
14.1 No dangerous product in respect of transport regulations
14.2
Notice/symbol transport
containers
None
14.3 Special marking for containers None
SECTION 15: REGULATORY INFORMATION
15.1
Marking according to GefStoffV/
EG
No obligation for marking
15.2 Water danger class Class 0 (self classifi cation)
15.3
Domestic requirements to be
observed
None
SECTION 16: OTHER INFORMATION
The information and data are deemed to be accurate and have been compiled from sources believed to be reliable. Modern Mill makes no warran-
ties, express or implied, with respect to the accuracy or completeness of the information and data contained herein, whether based on the claim that
such information and data are incorrect, incomplete or otherwise misleading. They merely serve for evaluation, examination and testing by the user.
Due to possible technical changes, the user is responsible to obtain the most up to date information. This information solely describes the safety
requirements of the product(s) and is based on our current knowledge. It does not constitute an assurance of the described product/products in the
sense of the statutory warranty regulations.
SAFETY DATA SHEET