Installation Instructions
9
• We recommend an exterior grade water soluble paint or stain as a protective coating to resist
•
cladding and provide easier maintenance by making cleaning easier
•
application and environmental needs
•
appearance
•
Adirondack chair https://www.oatey.com/products/cements-primerscleaners/cements
• The glue joint should be fastened on each side of the joint to allow adequate bonding time
• For best results, surfaces to be glued should be smooth, clean and in complete contact with
each other
•
Safety Warning:
•
temperature similar to wood
•
will minimize expansion and contraction
•
for expansion and contraction
•
• When joining boards in areas such as under eves on fascia, a shiplap joint is recommended
with exception of corners (a mitered corner will give the best appearance)
•
allow for movement
• Expansion and contraction may be an issue on longer “runs” (rake, fascia, frieze) comprised
• Based on temperature at time of installation (see chart below) create a gap between boards
Painting & Adhesives
from miter
100°F
50°F