Instruction manual

PROFICIENCY IN SURVIVAL CRAFT AND RESCUE BOATS OTHER THAN FAST
RESCUE BOATS
11 12
CHANNEL 16 OPERATION
1. Remove control panel protective cover.
2. Strap the unit around operator's wrist, hand or glove.
3. Press ON/OFF button for one (1) second to turn ON the Survival Radio.
4. CHAN 16 button stays lit (red).
5. Listen for the tone and for the squelch action 3 seconds after activating the
unit.
6. Press blinking PUSH TO TALK button to transmit.
7. Speak loudly and clearly into speaker area from a distance of
approximately 3"to 6" (7.5 cm to 15 cm).
8. Both Volume indicators stay lit during transmission.
9. Release PUSH TO TALK button to listen.
10. Adjust Volume by pressing the respective buttons (Note: there are 4
preset volume settings from which to choose).
11. Keep transmissions to a minimum to conserve battery power.
12. Periodically verify that the CHAN 16 button is lit (red) to guard against
accidental selection of channel 6.
13. Press ON/OFF button to turn unit off.
CHANNEL 6 OPERATION
1. Remove control panel protective cover.
2. Strap the unit around operator's wrist, hand or glove.
3. Press ON/OFF button for one (1) second to turn on the Survival Radio.
4. CHAN 16 button stays lit (red)
5. Listen for the tone and for the squelch action 3 seconds after activating the
unit.
6. Press CHAN 6 button to select channel 6.
7. CHAN 6 button stays lit (green).
8. Adjust Volume by pressing the respective buttons (Note: there are 4 preset
volume settings from which to choose).
9. Press blinking PUSH TO TALK button to transmit.
10. Speak loudly and clearly into speaker area from a distance of
approximately 3"—6" (7.5 cm to 15 cm).
11. Both Volume indicators stay lit during transmission.
12. Release PUSH TO TALK button to listen.
13. Keep transmissions to a minimum to conserve battery power.
14. Press ON/OFF button to turn unit off.