Specifications

SmartReader Plus Data Loggers
101
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
1.20.2 Basic Network
The Basic Network accommodates a maximum of three loggers.
Figure G-1: Basic SmartReader Plus Network
1. Insert Y-adaptor cables (YA-200) into each logger except the last one on the network.
2. Connect the first logger to your computer (or remote modem) using the IC-101 interface
cable. If you are connecting to a modem, refer to the TrendReader guide for information
on how to set up a modem.
3. Connect the loggers together with extension cables (CB-020).