User Guide

Y1-03-0165 Rev. B

Forward

Congratulations and thank you for purchasing the ACR SM-2 Automatic Crew-Overboard Light. The

combination of superior design, high quality raw materials and quality controlled manufacturing produces a

product that will perform for years to come. The Test Facility at ACR can reproduce some of the harshest

environmental conditions known to man. This assures that the products we design and manufacture can

stand up to the rigors found in a marine environment. With proper care and maintenance, your SM-2 light

will be in service for years to come.

ACR is proud to be certified to the ISO 9001:2000, the International Standard for Quality.

This manual provides installation, operation and maintenance instructions for the SM-2 light.

* * * Caution * * *

In order for the marker light to float properly, the 6 volt battery MUST not weigh more than 675 grams

(1.49 lbs). Exceeding this weight will cause the light to sink.

Test light buoyancy in shallow water prior to placing in service.

The following battery types are suggested for use in ACR Marker lights:

Suggested Screw Terminal batteries:

ANSI/NEDA: 915, 915C, 915D, 915AC

Duracell: M915, PC915

Rayovac: 942, 945

Eveready: 510S

Suggested spring terminal batteries (for use with optional battery adapter 9434):

ANSI/NEDA: 908, 908C, 908D, 908AC

Duracell: M908, PC908

Eveready: 509, 1209

Energizer: EN529, (not 529)

Rayovac: 941, 944

Panasonic: W-4FD

Note: Check adapter to ensure that screws are tight during regular maintenance.