Specifications

676
SAFETY & NAVIGATION
Detectors
Fireboy/Xintex Single Channel
Propane and CNG Fume Detector
The standard two-inch display module •
features a circuitry test and alarm horn
silence function
On / off switch opens and closes solenoid •
(not included) with the touch of a button
This is a simple, single channel propane fume detector that •
features a plug-in sensor and a Var-A-Brite indicator lamp that
brightens during the day and soften at night
Complete unit includes display module, one propane sensor •
and 20 feet of connector wire
FBY S-1A-NV Square bezel, w/ plug
Fireboy/Xintex
Propane Fume Detector
Features a plug-in, splash proof sensor•
Var-a-brite indicator light that varies in •
intensity between night/day
Circuitry test and an alarm horn "silence" •
function on the display unit face
Includes 2" diameter display module and one propane sensor •
with 20' lead wire
FBY S-1
Fireboy/Xintex
Gasoline Vapour Monitor
A microprocessor-controlled, two-•
channel gasoline fume detector in a
lowprole,waterresistantdesign
Calibrated to eliminate most nuisance •
alarms while allowing enough time to
take action
Features include plug-in sensors (second sensor optional), fault •
light alarm, fault lights to indicate a malfunction in either the
module or one of the sensors.
A "press to test" button for each channel indicates either an OK •
or Danger condition
An Alarm Silence button deactivates the alarm horn•
4-3/4" W x 3-3/4" H x 7/8" D•
Voltage: 12V to 15 VDC. Maximum current draw: Monitor mode
with 1 sensor: 230 mA, Monitor mode with 2 sensors: 400 mA,
Alarm mode: 420 mA
FBY M-2A Gasoline vapour monitor
Fireboy/Xintex
Dual Channel Propane/CNG Monitor & Control
A microprocessor-controlled two-•
channel monitor with automatic
solenoid valve on / off switch
A "press to test" button for each channel •
conrmsfunction
Calibrated at 20% LEL (lower explosive •
limit) to eliminate most nuisance alarms
while allowing enough time to take action
Includes one propane/CNG sensor on a 15 ft. cable, one sensor •
simulator (for use when not using the second monitoring
location), and one solenoid valve (S-2A only)
Voltage: 12V to 15 VDC•
Maximum current draw:•
- Monitor mode with 1 sensor and valve off: 230 mA
- Monitor mode with 2 sensors and valve off: 400 mA
- Monitor mode with valve on: 1.2A
- Alarm mode with valve off: 420 mA
4-3/4" W x 3-3/4" H x 7/8" D•
FBY S-2A Propane/CNG monitor and control
FBY S-2A-NV Propane/CNG monitor and control (no valve)
Fireboy/Xintex Gas & Propane Sensor
Colour-coded RED with a quick-disconnect
12-inch lead that connects to a standard
20-foot sensor cable for use with M-1, MB-1,
M-2A, S-1, S-1A and S-2A fume detectors.
Plug-in connectors eliminate wire routing
during installation or sensor replacement.
FBY MS-2-20' Gas & propane sensor with 20' of cable
FBY MS-2-HEAD Gas & propane sensor only
Gasoline Vapour Monitor
with Automatic Blower Control
Features of above M-1, plus 10 amp relay to
automatically start bilge blower fan
FBY MB-1R
Fireboy/Xintex
Gasoline Vapour Monitor
In addition to gas fumes, the M-1-R can •
also detect high concentrations of battery
hydrogen or engine exhaust
Supplied with a 15 foot cable and encased •
in a proprietary material that allows gasoline fumes to pass
through but not water
Var-a-brite lighting brightens the display light in daylight, •
while dimming light intensity in darkness
Integral, 85db alarm will sound at 16 - 20% L.E.L. (lower •
explosive limit)
Features include: test and mute functions, low voltage warning •
alarm set at 7 VDC and compact design
Mounts into a standard 2-1/16" gauge hole•
Standard operating voltage: 7-14V•
Maximum power draw: 210 mA •
Dimensions: 2" diameter body x 2-1/4" overall length.•
FBY M-1