Specifications

RANGE
COMPATIBILITY MODEL
CAT. NO.
LENGTH/SIZE
39
Accessories
1
Wire is 20 gauge with duplex
insulated Teflon® jacket
*.
30 cm (12”) SR5, SR6, SRP5,
SRP6
TCJ-Welded 01-0102
1
Ideal for high temperature applica-
tions. Wire is 20 gauge with
duplex insulated Teflon® jacket
*.
30 cm (12”) SR5, SR6, SRP5,
SRP6.
TCK-Welded 01-0103
1
Ideal for low temperature applica-
tions. Wire is 20 gauge with
duplex insulated PVC jacket
*.
30 cm (12”) SR5, SR6, SRP5,
SRP6
TCT-Welded 01-0104
2
Wire is 20 gauge with duplex insu-
lated Teflon® jacket
*. Customer
must either twist or weld the tip.
Specify length in feet SR5, SR6, SRP5,
SRP6
TCJ 31-0014
2
Ideal for high temperature applica-
tions. Wire is 20 gauge with duplex
insulated Teflon® jacket
*.Customer
must either twist or weld the tip.
Specify length in feet SR5, SR6, SRP5,
SRP6
TCK 31-0015
2
Ideal for low temperature applica-
tions. Wire is 20 gauge with duplex
insulated PVC jacket
*. Customer
must either twist or weld the tip.
Specify length in feet SR5, SR6, SRP5,
SRP6
TCT
31-0016
ACR can weld any thermocouple tip.
Provides the best contact, prevent-
ing contaminants from affecting sen-
sor reliability.
N/A Order thermocouple
wire separately
J, K, and T type
thermocouples
TC-Weld
89-0003
SENSORS: Temperature – Thermocouple Type
SENSORS: Relative Humidity
3
Relative humidity sensing element
that simply plugs into the existing
RH sensor port on compatible ACR
RH data loggers. The sensor is
equipped with a filter to protect it
from many contaminants. For envi-
ronmental susceptibility, see any
ACR RH data logger specification.
10 to 90% RH and
-20 to 40°C (-4 to 104°F)
N/A SR2, SR4, SRP2 RH-002
35-0009
4
An external Relative Humidity and
Temperature Probe for tight or
remote locations. Every RH read-
ing is temperature compensated for
accurate readings. For environ-
mental susceptibility, see any ACR
RH data logger specification.
Maximum extension is 30m (100”).
10 to 90% RH and
-20 to 40°C (-4 to 104°F)
90 cm (3”) SR2, SR4, SRP2,
SRP4*
*(except SRP4 LPD)
EH-020A
01-0040
2
Recalibration for ACR RH data
loggers and external RH Probes.
A 3-point calibration is performed
against a NIST traceable refer-
ence sensor.
N/A N/A SR2, SR4, SRP2,
SRP4, EH-020A
RH-CALIB
Call for
RMA #
1
2
3
4
J TYPE WELDED TIP THERMOCOUPLE WIRE
K TYPE WELDED TIP THERMOCOUPLE WIRE
T TYPE WELDED TIP THERMOCOUPLE WIRE
J TYPE BULK THERMOCOUPLE WIRE
K TYPE BULK THERMOCOUPLE WIRE
T TYPE BULK THERMOCOUPLE WIRE
THERMOCOUPLE TIP WELDING SERVICE
PLUG-IN REPLACEMENT RH SENSOR FOR POST 20,000 SERIAL # LOGGERS
REMOTE RH AND TEMPERATURE SENSING PROBE FOR POST 20,000 SERIAL # LOGGERS
RH CALIBRATION SERVICE
1
FEATURES/DESCRIPTION
-50 to 600°C (-55 to 1100°F)
* NOTE: The maximum temperature tolerance for the thermocouple wire jacket is 200 ° C (392 ° F)
-100 to 1150°C
(-145 to 2100°F)
-200 to 400°C
(-325 to 750°F)
-50 to 600°C
(-55 to 1100°F)
-100 to 1150°C
(-145 to 2100°F)
-200 to 400°C
(-325 to 750°F)