User Guide

User Manual 65 Y1-03-0218 Rev A
After entering the Default Service Password “NAUT”, in the password query, the Service
Configuration Menu may be accessed. In this menu it is possible to configure both the Service
Password and the User Password Settings, as well as input the MMSI/IMO Numbers and reset the
to Factory Settings.
a) Change Service Password
This screen provides a means to individually configure the Service Password. This password differs
from the User Password as it allows the user access to the Menu „Service Configuration“.
A minimum of 4, a maximum of 8 characters are allowed. The process of configuring the Service
Password is identical to that of User Password configuration (see Menu 5: Configuration, Submenu
1: Change User Password).
Dynamic Keys: Change Service Password
[M5] [Enter]
Confirm New Service
Password Input
[M8] [Back]
Return to Submenu
Service Configuration
N 1
o
24' E 0
o
17' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Service password protected!
Please enter service password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
N 1
o
25' E 0
o
18' |1>0.10|2>1.30|3>1.80nm
******* Change Service Password ********
Enter new password :
Repeat new password:
{Length: 4..8 characters}
----------------------------------------
| Enter | | | Back