User Guide

User Manual 66 Y1-03-0203 Rev. J
After entering the Default Service Password “NAUT”, in the password query, the Service
Configuration Menu may be accessed. In this menu it is possible to configure both the Service
Password and the User Password Settings, as well as input the MMSI/IMO Numbers and reset the
to Factory Settings.
N 1
o
24' E 0
o
17' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Service password protected!
Please enter service password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit