User Guide

Installation Manual 42 Y1-03-0208 Rev.A
6 Accessories
The following material is included with the NAUTICAST.
NAUTICAST
Basic Kit
includes
1 NAUTICAST Transponder
1 CD with demo software and documentation
1 installation manual, 1 user Manual
3 caps of plug
1 cable clamp (M5 thread)
1 guide plate Kit
3 angles + 3 mounting screws (screw bolt + square nut)
The NAUTICAST is supplied with some of the components listed below (contents depend on
customer requirements).
Category Description
Order Number
(old “NAU” numbers in brackets)
Gimbal Style Mounting Kit + 2 wing bolts + 4 screws
2650 (NAU-D503)
Mounting kit retro fit-frame + 3 screws, 3 clips, 3 nuts
2651 (NAU-D500)
Mountings:
19" frame + 3 mounting screws (screw bolt + square nut)
Discontinued
Matsushita GPS antenna marine II
2625 (NAU-X6011)
Deck Mounting for GPS Antenna Marine II (plastic) - Glomex (For P/N
2625)
2627 (NAU-X6012)
Pipe Mounting for GPS-antenna Marine II metal (For P/N 2625 GPS)
2626 (NAU-X6013)
Deck Mounting for GPS Antenna Marine II (metal) (For P/N 2625 GPS)
2821 (NAU-X6014)
Procom GPS antenna GPS 4
2622 (NAU-B602)
GPS antenna
solutions:
Deck Mounting Kit Metal Horiz. Surface -ProCom (for P/N 2622 and 2623)
(Thread 1/12)
2623 (NAU-X6022)
VH-3200 VHF Stainless Steel Whip Antenna 91.4cm (36 in.) Includes
Mounting Kit & Plug PL Male for RG214
2628 (NAU-B614)
VHF antenna
solutions:
Comrod VHF antenna AV 7 + mounting kit
2621 (NAU-B611)
Single
antenna
solutions :
Comrod AC 17 - AIS (combined GPS/VHF antenna)
+ mounting kit
+ splitter and cable
2624 (NAU-B620)
GPS / VHF extender with N and TNC connection (1m)
+ 1 pcs N(m)/RG214 crimp
+ 2 pcs TNC(m)/RG214 crimp
+ 1 pcs. PL(m)/RG214 crimp
2612 (NAU-B554)
AIS connection box
2640 (NAU-B401)
AIS cable open (3m) with all interfaces
+ pilot plug
2610 (NAU-B503)
Connector N(m)/RG214 crimp
2631 (NAU-X5531)
Connector PL(m)/RG214 crimp
2632 (NAU-X5533)
Connector TNC(m)/RG214 crimp
2633 (NAU-X5534)
Cables and
Interfaces
Gyro Converter 9028C
2641 (NAU-Z002)