User Guide

Installation Manual 33 Y1-03-0208 Rev.A
4.3 Entering Ship Settings
Select from the Main Menu “Ship Settings” Menu is USER password protected with default
password “NAUT”. Enter Password and use the up and down arrows to edit Ship Settings then
press Enter or the numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter Call Sign.
Select and enter Ship Name.
Select and enter Length of Ship.
Select and enter Beam of Ship.
Select and enter Internal and External GPS antenna positions.
Select and enter a default ShipType with the [Left] & [Right] arrows.
N 1
o
23' E 0
o
1
6' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1
o
19' E 0
o
1
2' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
/\ +
CallSign:D11233 / \|
ShipName:ANDREA DORIA | |
Length :220m | A
Beam :43m | x--+
RefPtExt:A200 B20 C10 D33m | | B
RefPtInt:A190 B30 C20 D23m +-C-+D-+
ShipType: Pilot vessel
----------------------------------------
| Save | | | Back